Anker Soundcore Space Q45 Bluetooth Module Replacement

Written By: Benjamin daCosta
  • Comments: 0
Anker Soundcore Space Q45 Bluetooth Module Replacement

Difficulty

Moderate

Steps

4

Time Required

No estimate

Introduction

Is your Anker Soundcore Space Q45 bluetooth not connecting to your device, preventing you from using the device to its full capability? If so, here is a guide to fix the problem in a few easy steps.

  1. Xy5NHIeWQfWIEdad

    • Use the iFixit opening tool to disconnect six clips holding the outer covering in place.

  2. l53dNTw2QgrfTons
    l53dNTw2QgrfTons
    rKy46ElBdUPZEurw
    1nlOIxGXMHtdbj3t

    • Remove three screws holding the inner plastic covering in place with a Phillips screwdriver.

    • Remove the inner plastic covering using an iFixit opening tool.

  3. MZmpGoHCUkPuUR2X
    MZmpGoHCUkPuUR2X
    oRYTVqmPSXEJtvm5

    • Remove two screws from the motherboard with a Phillips screwdriver.

    • Remove the motherboard from the headphones.

  4. HyLNjcFoGr1Wj1U4

    • Use a soldering iron to desolder the connection from the Bluetooth receiver.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Benjamin daCosta

Member since: 19/03/24

597 Reputation

0 comments