Introduction

This guide will show you how to replace the motherboard in your Anker Soundcore Space Q45 headphones. You will need to remove the outer casing of the right headphone to access the motherboard.

  1. Xy5NHIeWQfWIEdad
    • Use the iFixit opening tool to disconnect six clips holding the outer covering in place.

  2. l53dNTw2QgrfTons
    l53dNTw2QgrfTons
    rKy46ElBdUPZEurw
    1nlOIxGXMHtdbj3t
    • Remove three screws holding the inner plastic covering in place with a Phillips screwdriver.

    • Remove the inner plastic covering using an iFixit opening tool.

  3. MZmpGoHCUkPuUR2X
    MZmpGoHCUkPuUR2X
    oRYTVqmPSXEJtvm5
    • Remove two screws from the motherboard with a Phillips screwdriver.

    • Remove the motherboard from the headphones.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Kristen Gismondi

Member since: 12/11/14

84535 Reputation

0 comments