BISSELL 3-in-1 Turbo 2610C Filter Replacement

Written By: Williams Kalu
  • Comments: 0
BISSELL 3-in-1 Turbo 2610C Filter Replacement

Difficulty

Easy

Steps

6

Time Required

1 - 2 minutes

Introduction

This guide will show you how to replace the filter and empty the dirt container on a BISSELL 3-in-1 Turbo Lightweight Stick Vacuum (2610C). To keep your vacuum in good working order and your carpet clean, it is recommended that you replace the filter every 3 months. Replacing the filter regularly improves the suction power of vacuum cleaner and should extend the life of the machine.

Between filter replacements, it's important to wash the filter. Let it air dry completely before placing it back in the machine for use.

  1. R1OtfqlxBGaewEsS

    • Push up on the gray tab above the dust bin.

  2. MuBUVktsITppIUqh

    • Remove the dust bin.

  3. qkfAxlru6xPg2ppI
    qkfAxlru6xPg2ppI
    JCr2XWTRnhJIyNSs

    • Pull the filter straight up to remove it from the dust bin.

  4. kAOCiYRcDSXCkVsI

    • Empty the dirt from the dust bin into a garbage can.

  5. V2QxWUgblDraZjJA

    • Set your new filter back into place at the top of the dust bin.

  6. Bb6DrZt3BqJ151ZY
    Bb6DrZt3BqJ151ZY
    vntvrDkwQhVwYHIP

    • Place the bottom half of the dust bin back, then push the top in until you hear a click.

    • The "click" indicates that the dust bin has attached securely.

Conclusion

Once this is done, you are free to use!

Author

Williams Kalu

Member since: 16/01/24

133 Reputation

0 comments