Bike Chain Replacement

Written By: Camara Dylan

Comments: 0

Difficulty

Moderate

Steps

Time Required

1 minute

Introduction

Inner and outer plate pairs that are fastened together with pins form chains. In the end, your bike's chain engages the gears. Your bike is probably unrideable if a chain is out of balance. These are some of the most typical issues with bike chains, along with solutions.

Tools

Pin Spanner

Step 1

Pick up the slipped chain and position it to the top of the correct gear while pedaling.

Step 2

Once the chain teeth are locked in place, slowly release the derailleur and push the pedal forward to move the back wheel.

Step 3

Continue pedaling until the rest of the chains are fit back into their original positions

Step 4

Before you get back on your bike, shift to the lowest gear and continue pedaling. This movement should realign your chain and lock it back into place.