Introduction

This guide covers the removal and replacement of the reservoir tube for the Black and Decker DCM100R. This guide is meant to fix the issue of water not flowing properly through the device. Before following this guide check for other possible causes on the trouble shooting page.

  1. EAHH6g5FxlwWlcLu
    • Open the lid.

  2. iaXDRGqNC2WBZbKv
    iaXDRGqNC2WBZbKv
    BvLxkdrdSt1xDOcJ
    cl1lTpaOxBu2ZDUh
    • Using the jimmy, pry the shower head out of place

  3. MhtX5n5QTAltd4Nr
    MhtX5n5QTAltd4Nr
    aBp6sEGUhYXSr51D
    S6BSQQvNDFA1NZyF
    • Turn the shower head 90 degrees and remove it.

  4. Gh4neVgutljiofYA
    Gh4neVgutljiofYA
    kCRZQme1jRhtHpqi
    • Remove the hinge containing the reservoir tube.

  5. 3xmTrOU3Rtjla1bM
    3xmTrOU3Rtjla1bM
    kVpYCTSXTLCLm1BO
    • Pull out and replace the reservoir tube.

Conclusion

To reassemble your device, follow these instructions in reverse order.

logan kniatt

Member since: 13/09/23

339 Reputation

0 comments