Introduction
This guide is to help you fix the phantom double-clicking problem on the MX Anywhere 3 mouse.
Before you start, please follow the instructions in the guide "How to Open Your Logitech MX Anywhere 3" (How to Open Your Logitech MX Anywhere 3 - iFixit Repair Guide) to open up the mouse. Then, you continue with this guide.
-
-
Those are tools you need.
-
Knife and screwdriver are for opening up the mouse. You may also need an iron (which will help you to soften the glue at the mouse feet).
-
Dust blower, lubricant and tissue are for fixing the click.
-
-
-
Please follow the instructions in "How to Open Your Logitech MX Anywhere 3" to open up the mouse. It looks like this when you're done.
-
You can heat up an iron and place it on the mouse feet to soften the glue. Be careful when using the iron.
-
-
-
Disconnect the cables at the locations marked in red and orange circles. In any case, handle with care to avoid damage to the cables.
-
Cables in red circles can be easily unlocked by lifting the white pins up. You, however, may need to use some force on the orange one.
-
-
-
Those are tools you need for this last step.
-
Use the dust blower to blow the dust away.
-
Then, apply some lubricant to the locations marked in blue circles. Make sure you spray the lubricant into the clicking pieces in both the lower and upper parts of the mouse.
-
Make a few clicks and scroll the wheel to ensure that everything works smoothly.
-
Use the tissue to wipe away excessive lubricant before reassembling the mouse.
-
To reassemble your device, follow these instructions in reverse order.
