Hisense Sero 8 Front and Back Camera Set Replacement

Written By: Katherine
  • Comments: 0
Hisense Sero 8 Front and Back Camera Set Replacement

Difficulty

Easy

Steps

3

Time Required

10 - 20 minutes

Introduction

If you are experiencing issues with the camera on your Hisense Sero 8 device due to prolonged use, you can fix it by replacing the front and back camera sets. This guide will help you to repair the camera set. Before you begin, please check the troubleshooting guide to see the symptoms of your device.

  1. CDIw5VWAWMp6MIon
    CDIw5VWAWMp6MIon
    bYZWGYZWVaQTaRZQ
    lRcEdq3oPsScTOtW

    • Use an opening tool to pry open a corner of the device, then slide the tool down the side of the device to completely open it.

  2. bBAgi6SXAuthaPPX

    • Use your fingers to pull the latch upwards to unlock the ribbon cable.

  3. PUJQHNgieGKHlAeM
    PUJQHNgieGKHlAeM
    IlhQrNMjfvf3oPxG
    TjVDQhNCtPdD4Apf

    • Use the pointed end of the spudger to lift the camera from the motherboard.

    • Use tweezers to carefully pull out the camera set.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Katherine

Member since: 23/02/15

316 Reputation

0 comments