How to Open Logitech Harmony 1100

Written By: Keegan Williams
  • Comments: 1
How to Open Logitech Harmony 1100

Difficulty

Easy

Steps

4

Time Required

2 minutes

Introduction

  1. 2UeR6BBPGlFPOAGh
    2UeR6BBPGlFPOAGh
    X6dNBtSKFmsJE2AC

    • Remove battery cover, pushing down on circled areas and pushing outward

    • Remove battery by lifting up on corner exposed by indent in case

  2. Oan2KC4VDiVoT1Nd

    • Use a J0 screwdriver head

    • Remove 3 screws from battery compartment

  3. nWJNgdUGgR5EvYxA
    nWJNgdUGgR5EvYxA
    eaaSUZr6cZBqXrTN

    • Open connector port on side

    • Remove screw with PH00 screwdriver head

  4. oiDtymU3TfG6GgmK
    oiDtymU3TfG6GgmK
    TvfKuTGrGvy6r1uk
    quDGv6cvsML5ZRnV

    • Use plastic opening tool to pry at the open slits on the side.

    • One or two silver foam cubes may pop out of the device. These belong in the slots shown in the third picture. They do not need to go back until reassembly.

    • Also the plastic connector door will fall off. It will need to be put back upon reassembly.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Keegan Williams

Member since: 19/02/16

216 Reputation

One comment

Will changing the battery reset the settings within the remote?

wiboman AT gmail DOT com

Wibo Lammerts -