Introduction

Is your car having trouble starting? Is there corrosion build-up on your terminals, preventing a proper connection? This handy guide will help you remove the troublesome terminal and replace it with a brand new one.

Warning: It is dangerous to work on a vehicle battery. Exercise extreme caution when following this guide.

  1. DmiOCfwinwHCqeUf
    DmiOCfwinwHCqeUf
    SZwun6kGsYFp2dE4
    • Remember to remove your car key from the ignition and shut off the car before performing this guide.

    • Locate the terminals on the top of the car battery. Next to each terminal is a positive(+) or negative(-) sign, indicating the charge.

    • The positive terminal looks to be in working order, but the negative end has a lot of corrosion buildup. This terminal needs to be replaced.

  2. PZadTyAJmiRbvKt4
    PZadTyAJmiRbvKt4
    EGEgW5KUZVLOYbM3
    • Find the nut located on the side of the terminal.

    • Using an adjustable wrench, rotate the nut counterclockwise to loosen it.

    • Use an appropriately-sized wrench or socket, not channel locks as shown in the photo.

    • You do not need to loosen the nut all the way off the bolt, but just enough to loosen the terminal's grip on the node.

  3. eyc2da1qWdY4JAYA
    eyc2da1qWdY4JAYA
    vNiByGSfimmSZMIF
    • Always remember to remove the negative terminal first before the positive terminal. This will prevent shorting to the ground and possibly causing shock or a fire.

    • Carefully use a rag to lift up the terminal off of the battery node.

    • Be cautious when handling battery corrosion, as it can irritate the skin and is harmful if it comes in contact with your eyes.

    • Place the terminal on a rag or towel and make sure it doesn't come in contact with the battery node.

    Quite an overstatement to say ”remove the possibility” as the possibility still remains, it’s just reduced

    Erno Pentzin -

  4. OXVYtLOxiQQUlW2O
    OXVYtLOxiQQUlW2O
    LGYECcWgfDGsGpCh
    • On the positive terminal, locate the nut along the side.

    • Using the wrench, rotate the nut counterclockwise.

    • You do not need to fully loosen the nut off the bolt, but just enough for the terminal to be easily removed from the node.

  5. yQ1AZPXlVw6pOQmu
    yQ1AZPXlVw6pOQmu
    h3XhD2h1MRKycmVn
    • Using a rag, carefully remove the positive terminal from the battery node.

    • Place the terminal on a rag or towel, and make sure it does not come into contact with the battery node.

    Shouldn’t you take the Ground or Negative size first? Positive after.

    Joseph Dos Santos -

    Step 6 should be remove Positive terminal after.

    Joseph Dos Santos -

  6. HELbjEyrcWOFOr3Z
    HELbjEyrcWOFOr3Z
    TTnoVOxYTQFw3W1s
    cPYKYVCCOOBDDUW3
    • On the negative terminal, locate the nut on the side facing upwards.

    • Using the wrench, rotate the nut counterclockwise and remove it from the bolt.

  7. K5yKyRXKFXjV53JA
    K5yKyRXKFXjV53JA
    RECxukyOrVRP1Tjf
    q6lBuVVH6wXWivpt
    • Take the wire plate on top and remove it carefully from the bolt.

    • At this point, it is fine to handle the metal plate with your hands since the terminals are disconnected from the battery and there is nothing completing the circuit.

    • Remove the bottom wire plate from the bolt, placing it carefully to the side.

  8. fZJXolD3NGIVOBLR
    fZJXolD3NGIVOBLR
    sajjsNxKGAp1SXIa
    • Set aside the old battery terminal, and replace it with the new one.

    • Replace the wire plates in the order they were taken off.

    • Although it is not necessary that the plates be placed in the same order again, it is generally a good idea to go with the order that it came in.

  9. TErVvilpoVdjmYRE
    TErVvilpoVdjmYRE
    REIPLnIoed6LjPKp
    • Place the flat washer and the screw-on head that came with the battery terminal onto the vertical bolt.

    • Tighten the head clockwise and make sure the wire plates are secured.

    • Not all battery terminal packs come with a washer and screw-on head. If your pack comes with a nut, use the wrench and tighten the bolt clockwise.

  10. 4eYtedBS2aKXYOpc
    • Using a rag, place the positive terminal back onto the positive node.

  11. ujTTgWDntgoJ4Rjv
    • Place the negative terminal back onto the negative node.

  12. TQ6bBrLAetfmHffr
    TQ6bBrLAetfmHffr
    uvNjMfwaiRB1bHOx
    jakUAxCowJGVOYA2
    • On the negative terminal, use the wrench to rotate the side nut clockwise to tighten it.

    • Next, perform the same action on the side nut of the positive terminal.

    • To ensure a secure connection, be sure the nut is snug and that the terminal can't come off easily.

    it looking good

    trung vuhoangminh -

David Wright

Member since: 23/02/15

655 Reputation

8 comments

Nice post. Shop car battery at batterybhai and their expert technical team come to install the battery with all battery replacement tools kit.

mayank tanwar -

very interesting post. Thanks for sharing it.

https://www.sarexports.com/product-categ...

Raman Malik -

I change negative terminal to new one still have corrosion why?

אנדריי מזילו -

They are corrotion after doinging this within a4 to 5 month time the red cable is worst

Carol -

Use Petroleum-Jelly (preferably) OR if not there then

use Vaseline onto both the Terminals( +, -ive) to prevent rusting of your both terminals of Battery PLEASE .

SANJAY KHANDELWAL -

Side battery terminals

Roman Bernal -

An enlightening review that sheds light on the intricate world of <a href="https://waltonbd.com/battery">Battery</a>. The clear breakdown of battery types, charging techniques, and lifespan considerations is truly invaluable for anyone seeking to power their devices efficiently and sustainably. Kudos for demystifying this essential technology

russ -

dfdafdafdafdafdafdaf

trung vuhoangminh -