Huawei Honor 8 Screen Replacement

Heat the parts marked in red on the back side of the phone with a hair dryer or heat gun.

Attention: The sides have to be hot, not scalding.

Insert the iSesamo delicatley between the two sides (see photo)

Once the iSesamo is inserted, slide it along the sides to remove the adhesive.

ATTENTION: DO NOT SLIDE THE ISESEMO ALONG THE PART MARKED IN GREEN.

Remove the screw on the metal plate which protects the fingerprint sensor cable

Remove the the fingerprint censor cable using a plastic spudger.

Remove the 16 screws with a Phillips screwdriver.

Using the iSesamo, remove the protection from the motherboard

Remove the 2 tabs marked in red.

Gently remove the battery with a playing card or bank card.

Peel off the connector on the screen.

Heat the contours of the screen as shown in Step 1.

insert the iSesamo between the screen and the chassis

Be sure to pass the iSesamo under the white plate of the screen (see photo)

Go around the phone.

Note that the operation can be more complicated depending on the level of the screen.

Carefully remove the pieces of glass and the adhesive on the frame