LG Enact Charging Port Replacement

Written By: pranay_munikuntla
  • Comments: 0
LG Enact Charging Port Replacement

Difficulty

Moderate

Steps

9

Time Required

15 minutes

Introduction

A working charging port is a mandatory part of making sure your device works. If you are having issues with your LG Enact charging port not working properly, this guide will help you replace it.

Be sure the device is fully powered off and be sure to follow the steps correctly.

  1. w4VgyvRMwJyjwTJG
    w4VgyvRMwJyjwTJG
    R2WlxEmAVoJriDfH
    eCtGZq1wOAJBOYGf

    • Open the back cover by prying into the bottom tab with an iFixit opening tool.

  2. oXfvPVPC3JIQcuky
    oXfvPVPC3JIQcuky
    vYQEbnmft3NZXrew
    HPJHvf4KLUXZM2Gc

    • Use an iFixit opening tool to remove the battery.

  3. AIwxVEA2V1B4MXh5

    • Remove the three 1.2 mm screws from the speaker using a Phillips #00 screwdriver.

  4. Ep4LEoLq5y4PxvXq
    Ep4LEoLq5y4PxvXq
    ttuOuHSnuUZFXpmQ

    • Use an iFixit opening pick to pop out the speaker.

  5. UTB3gnWPPDmuKu2s
    UTB3gnWPPDmuKu2s
    PAhWo5uwu2JEcYVs

    • Remove the nine 1.2 mm screws from the midframe using a Phillips #00 screwdriver.

  6. VnLJWXuFF4kJBMF1

    • Use the iFixit opening pick to pry out the midframe.

  7. 5JBUgCEFnEGXsMFr
    5JBUgCEFnEGXsMFr
    kSeZ21MnlT3OeqwD

    • Unplug the four ports connected to the motherboard.

    • Disconnect the two wires on top of the battery.

    • Disconnect the two wires under the battery.

  8. G1XUPgbIGIc1j6yF
    G1XUPgbIGIc1j6yF
    arKtSDDMWpVIZ4TG

    • Slowly pry out the motherboard using an iFixit opening pick.

  9. AEdxojQCkFXKupQi
    AEdxojQCkFXKupQi
    23BLgY13YEIDsA5k

    • Gently peel off the orange strip attached to the charging port using an iFixit opening pick.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

pranay_munikuntla

Member since: 12/09/23

621 Reputation

0 comments