Lenovo V15-ADA RAM Replacement

Written By: Jacob Schorr
  • Comments: 0
Lenovo V15-ADA RAM Replacement

Difficulty

Easy

Steps

8

Time Required

30 seconds - 1 minute

Introduction

This guide shows how to access and safely disconnect and reconnect the RAM from your device.

  1. Y1nuV61TsLdGZVS5

    • Remove the 10 marked screws using a Phillips #1 screwdriver bit.

    • M2.5 × 7 mm, Phillips-head (6) (RED circles)

    • M2.5 × 4 mm, Phillips-head (4) (ORANGE circles)

  2. ARnQtuQUeghUyewp

    • Remove the 10 screws from the back plate.

  3. raWXMOxLK4ORVVmw

    • After all 10 screws have been removed, insert a spudger between the bottom plate and the housing and slide across.

    • Repeat for all 4 sides until loose.

  4. BtoqD2qIMe4Mpitf

    • Pop off the back plate and set aside.

  5. biEQMF4w4ncq5mJj

    • Push the clamps holding the RAM card in place back.

  6. LWGqZrO1lh35lfLh

    • Lift out RAM card.

  7. WdCtTHOxA2BcpbpL

    • Pull RAM card out.

  8. DXpbKnGPGGaL6xpF

    • After completing steps 5-7, the RAM is successfully removed.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Jacob Schorr

Member since: 21/02/24

433 Reputation

0 comments