Logitech Zone Learn Wired Headset Ear Pads Replacement

Written By: Spencer Day
  • Comments: 0
Logitech Zone Learn Wired Headset Ear Pads Replacement

Difficulty

Very easy

Steps

2

Time Required

2 - 3 minutes

Introduction

Use this guide to replace one or both of the ear pads (also called ear cushions, headset cushions, or headphone cushions) on your Logitech Zone Learn wired headset.

The Zone Learn headset has the option of both on-ear and over-ear pads.

  1. BYJJPCDPWwVet3VM
    BYJJPCDPWwVet3VM
    mSgWnBZUSB4tDHvu

    • Unplug the cable from your headset.

    • During your repair, it can be helpful to lay your headset on a soft cloth to stabilize it and prevent damage.

  2. GigQdYesFEWHjWqm
    GigQdYesFEWHjWqm
    bYJIGeDRfuGdAuCC
    1toDQjGmpwjHGhYE

    • Firmly grip a cup with one hand, and with your free hand twist the ear pad counter-clockwise to unclip and remove it.

    • The pad should come off fairly easily. If it's not moving, twist the other direction.

    • Repeat the process to remove the other ear pad.

    • To install an ear pad, put it over the cup at a slight angle, push it in, and twist clockwise until the pad clicks into place.

Conclusion

Repair didn’t go as planned? Try some basic troubleshooting, or ask our Answers community for help.

Author

Spencer Day

Member since: 14/09/22

59589 Reputation

0 comments