Introduction
In this guide we have a MSI Force GC30 V2, model number/name is MSI Force GC30 V2 and we are disassembling the back cover plate of the controller. This will also be the first step to all other replacement guides.
-
-
Puncture the sticker where indicated using a screwdriver.
-
Remove the 9.1 mm-long Phillips #0 screw.
-
Remove the remaining six 9.2 mm-long Phillips #0 screws with a Philips #0 screwdriver.
-
-
-
Insert an opening pick in the gap between the front and rear case.
-
Slide the pick around the perimeter of the controller while prying.
-
Once the rear case is released, gently pull it away from the front case.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
