Introduction
Replace the flash bulb in your camera if the flash does not fire correctly.
Tools
-
-
Use your finger to push the latch of the compartment door to the center of the camera body, per image 1.
-
Push the door open, and remove the existing battery with your fingers, per images 2-3.
-
-
-
Using a Phillips #000 Precision Screwdriver, remove the two 3.0 mm screws from inside the compartment.
-
-
-
Place the plastic opening tool along the crack on the side of the flash compartment cover and pry open and detach the cover.
-
-
-
Using a Phillips #000 Precision Screwdriver, remove the 4.0 mm screw from the plastic cover.
-
Detach the plastic cover.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.