Introduction
This guide will easily help you attach an out door doorknob. The resources needed to fix the doorknob would be a cross head screwdriver and new doorknob. There aren't any precautions when getting this done so I'd suggest this to be some type of bonding time between you and a loved one.
Tools
Parts
-
-
Begin pushing the latch inward from the front face of the bolts.
-
Adjust the inside by holding it with both fingers.
-
Begin to screw both of the short screws into our middle side area of the latch.
-
-
-
Grab both of the long screws.
-
Adjust the back head of the doorknob to be facing in a straight upward position.
-
Once everything is positioned right, begin screwing in the long screws.
-
-
-
Allow the back end of the doorknob to be properly aligned with the front head when attaching.
-
Once both parts are attached and alined begin screwing in the screws fully inwards.
-
-
-
Now that the new doorknob has been attached, begin testing it out with a key or door handle depending on which one you may have.
-
To reassemble your device, follow these instructions in reverse order.
