Introduction
The back shell of your PDP Rematch Advanced should be replaced if it's damaged or if you want to swap it out for a different color shell. If you need to replace the back shell, take out the motherboard with this guide.
-
-
Orient the controller so the back side is facing you.
-
Use a Phillips #000 screwdriver to remove the seven 9 mm screws that secure the back shell.
-
-
-
Twist the thumbstick to remove it from the motherboard. Repeat this step if both thumbsticks need to be replaced.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
