PDP Rematch Cable Replacement

Written By: Sydney Foster
  • Comments: 0
PDP Rematch Cable Replacement

Difficulty

Moderate

Steps

6

Time Required

5 minutes

Introduction

Disconnection of the cable from the motherboard could result in freezing, restarting, or powering off completely. If this occurs when you are trying to play your game, then using this guide to replace the cable buttons for the PDP Rematch Controller, model number 500-134-1 will help solve your problem.

  1. MCwQTytdBhoLkgMX
    MCwQTytdBhoLkgMX
    RGNdCmNyQ1JUdVgY

    • Grip one side of the controller firmly.

    • Insert an opening pick into the crease between the faceplate and the body of the controller.

    • Once the pick creates a gap in the crease, gently insert another pick into a different section of the crease.

    • Carefully move the picks along the controller's crease line until you hear a popping sound.

    • Gently lift off the faceplate by hand.

  2. GNd2HBdtZJfpXqRr
    GNd2HBdtZJfpXqRr
    C6Go4oQSl3oXuKS6

    • Remove the 8 mm screws from the hard cover using a JIS #00 screwdriver.

    • Since the screws have been removed, avoid shaking or moving your controller too much to prevent other buttons from falling out.

  3. SWqMuZWv1kF3m4Q1
    SWqMuZWv1kF3m4Q1
    rePcYyIVSbViwIcq

    • Gently lift off the hard cover with your hand; it should not need much force.

  4. uTVW3GGAEDXmaQRl

    • Remove the two screws on the motherboard with a JIS #000 screwdriver.

    • Gently flip the motherboard up to see the other side.

  5. ftMSSgBTGaEHIwpF

    • Remove the cable from its plug on the motherboard.

    • This should give you room to carefully detach the Male Pitch Terminal Pin Header from the Female Terminal Pin.

  6. 5PBD3XHDp5ROrCR6

    • Take the new cable and thread it through the slot. The terminal block should fit loosely into the slot.

    • Then, insert the Male Pitch Terminal Pin into the Female Terminal Pin.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Sydney Foster

Member since: 30/01/24

97 Reputation

0 comments