Philips Sonicare ProtectiveClean 6500 Battery Replacement

Written By: Liam Casto
  • Comments: 0
Philips Sonicare ProtectiveClean 6500 Battery Replacement

Difficulty

Moderate

Steps

4

Time Required

15 minutes

Introduction

If your Philips Sonicare ProtectiveClean 6500 isn’t powering on, has intermittent power, or not holding charge, use this guide to replace the battery.

  1. qHkJ4aTEWSqpkTG1
    qHkJ4aTEWSqpkTG1
    tYniFBs3Z3MZxeot
    oh1jx5RogS15XssJ

    • Pry the bottom cap away from the toothbrush body.

    • Pry the bottom cap away from the toothbrush body until it releases.

    • Remove the bottom cap by hand.

  2. sldqoYVPsHXVWGgU
    sldqoYVPsHXVWGgU
    tfHcdb5uyLghvqqP

    • Use a metal spudger to release the two retaining clips inside the device.

    • The clips release when pried inward.

  3. AJ1qtmdDYDcNnDCv
    AJ1qtmdDYDcNnDCv
    VQL3PiAP1UQPSWdv

    • Slide the internal assembly out of the chassis.

  4. JqyamOCn2NUNRMxU

    • Use an opening tool to gently pry up the battery.

    • Remove the battery.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Liam Casto

Member since: 01/04/24

337 Reputation

0 comments