Princess Wand Speaker Replacement

Written By: Samantha
  • Comments: 0
Princess Wand Speaker Replacement

Difficulty

Difficult

Steps

4

Time Required

10 - 15 minutes

Introduction

If the speaker has stopped working, and you replaced the batteries, then this one way you can fix the speaker. There are no hazards or special requirements for this guide.

  1. fPvT5FhQSVKMciuE
    fPvT5FhQSVKMciuE
    5ODwDG3hIjqdIDMm

    • Use a Phillips #0 screwdriver to remove every screw on the back of the wand.

  2. wwCftbsD1hYmeara

    • Next, gently open the wand.

  3. ggbi4CTbNbjXJVns

    • Locate the speaker at the bottom of the wand, and take it out.

  4. I3YGvoCEcPqFL1GL

    • Desolder the speaker wires from the terminals on the speaker.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Samantha

Member since: 01/06/16

131 Reputation

0 comments