Shark Rocket Professional Floor Hose Replacement

Written By: Brad Iglesia

Comments: 7

Shark Rocket Professional Floor Hose Replacement

Difficulty

Easy

Steps

Time Required

5 minutes

Introduction

This guide will teach you how to replace or fix the floor hose of your Shark Rocket Professional Vacuum.

Tools

Coin

Step 1

Look at the side of your vacuum.
Identify the button that says "Floor Nozzle."
Press this button and remove the main body of the vacuum.

Any advice on how to replace this clip? I knocked my vacuum over and it hit my bookcase just right on this clip and broke it, so now the bottom piece and the body do not stay attached.

Cyndy Ryann -

Step 2

Look at the bottom of the Floor Nozzle.
Use a coin to turn the orange locking dials counter-clockwise.
If you are unsure, follow the arrows when turning the orange dials because the labeling is confusing.

Step 3

Use your fingers to pull open the panel locked by the orange mechanism.
If there is debris stuck in the tube, use a long, thin object to remove it.

You don't show how to replace the hose

sherryg1368 - 11/09/18

Is there more to this somewhere?

Cherika Laird - 29/08/19

Did you mean to label this cleaning instead of replacement?

Zack Hale - 21/11/20

You don't show how to replace the hose..... I got this far on my own!

Marty M -

I don't get it people comment that you didn't do what you said you would do and yet you don't fix it so why bother to comment. Why even have a comment option?

dianedebaun -

Apparently ifixit has issues with completing a train of thought.

William Collins -