Turtle Beach REACT-R ABXY Buttons Replacement

Written By: Dodi Imam
  • Comments: 0
Turtle Beach REACT-R ABXY Buttons Replacement

Difficulty

Moderate

Steps

3

Time Required

10 - 20 minutes

Introduction

The ABXY buttons are crucial for game and menu control, making them essential for gaming consoles. These buttons are easily accessible once the motherboard is removed. If your ABXY buttons are sticking or unresponsive, it might be time to consider cleaning or replacing them.

This guide will show you how to access the REACT-R and replace the ABXY buttons. The only tool needed for this guide is a Phillips #00 screwdriver.

  1. yMewotLevKRNmYHB
    yMewotLevKRNmYHB
    HCuXWGbRXHF1P6sO
    eynfW5h5sRBVevwE

    • Position the controller face down so that you're viewing its underside.

    • Use a Phillips #00 screwdriver to remove the seven 9.2 mm Phillips screws that secure the rear case.

    • Use both hands to lift the backplate away from the controller.

  2. pDyGrMIuFS2XKAgN
    pDyGrMIuFS2XKAgN
    pp4oAsQoFyR1CR32
    nGOUDwrQsCIbyY4G

    • Use a Phillips #00 to remove the four 9.2 mm screws that secure the motherboard.

    • Two of the screws are hidden under the red wires.

    • Gently lift the motherboard up and out of the chassis.

    • Be careful not to strain the vibration motor wires.

  3. D6QUFTLPZecoIJMo
    D6QUFTLPZecoIJMo
    aGJbqNhuMNPNfuBV

    • With the motherboard removed from the face plate, the buttons will be exposed from the inside.

    • The buttons are no longer secure and may fall out. To avoid this, make sure the controller is face down.

    • Gently remove the ABXY buttons.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Dodi Imam

Member since: 16/02/24

613 Reputation

0 comments