Introduction

If your Voluas VL001 pet feeder is having problems with getting food out, you may have an issue with your feeder mechanism. This is the part that has a fan-like shape and rotates to dispense food out of the device.

  1. 6B6RKUxYLNPaEP4E
    6B6RKUxYLNPaEP4E
    o6dRDK4T6sy2BTc5
    1ZHMSLwJjsAwTKXM
    • Remove the lid to the storage tank by using the latch and lifting off.

    • Grab the food storage tank on both sides. Depress the tabs that say "Push" on them and lift the tank off.

  2. K6DHLlW62KwxMDQY
    K6DHLlW62KwxMDQY
    BMb6ISL3XZhjl2HV
    Z6rfYIOS2bxYEYSo
    • Grab the spindle from the bottom.

    • This will prevent the feeder from spinning while you loosen the screw.

    • Using a Phillips #2 screwdriver, remove the single 11.6 mm screw in the center of the topside of the feeder mechanism.

    • Once the screw is removed, grab the three-pronged silicone agitator and remove it from the feeder.

  3. vEX3OYmHfstmGE5u
    vEX3OYmHfstmGE5u
    yS2RWrNcmDmrw2If
    BPkGcEFfURJsnsLQ
    • Flip the storage tank over so that the bottom side is facing up.

    • Using a Phillips #2 screwdriver, remove the three 11.3 mm screws that hold the plastic cap onto the bottom of the tank.

    • Lift the plastic cap off the tank.

  4. 3WGkrSHwpbFey4TY
    3WGkrSHwpbFey4TY
    IgwWADL4qUNeP6IA
    • Firmly grab the spindle of the mechanism and remove it from the bottom of the tank.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jade Thomson

Member since: 30/01/24

699 Reputation

One comment

Do you know where to get a replacement part? They say they don’t sell them.

Abigail Donnolly -