Introduction

Need to know how to replace the filter for a water filtration system? I am going to show you how to do this so that you can drink clean, filtered water. There is no risk during this procedure and it is simple; no background experience is needed. This is a helpful guide to show you how to replace a used water filter.

Note: Filters need to be changed every three months, otherwise the water will be undrinkable and can pose health risks.

  1. MEpsIUReYLpRWNP2
    MEpsIUReYLpRWNP2
    JIBaTEvkBCclHt5Z
    • Turn off water supply.

  2. uJVXP4PDUMeJW6gh
    • Press the button on the top of the filtration device to release water pressure and let excess water drain.

  3. lvnWMZAPIjIvXe6i
    lvnWMZAPIjIvXe6i
    kgDXfTayciSQptyr
    • Unscrew the filter canister using the canister wrench.

  4. UGbiNW2BWcOBBdAF
    UGbiNW2BWcOBBdAF
    cjCOSGwLaL4omyk4
    • Take out the old filter and discard it.

  5. nbbrrOV6qQQBydDU
    • Clean out the inside of the filter canister with soap and water.

  6. xYFAXeTCSCcEfOSk
    • Put the new filter inside the filter canister, making sure it goes in properly.

  7. c2wkECT1HYcrdYeM
    c2wkECT1HYcrdYeM
    MgNHjBcOgVnyUtT2
    AfsiQTF3tTO6GBX2
    • Screw the filter canister back into place using the canister wrench, making sure it's tightly screwed in.

  8. fn6kAmFdNJBQ34L1
    fn6kAmFdNJBQ34L1
    s1YJscOV2TMSWtm4
    • Turn the water supply back on.

  9. MCiXjaOTHXa6Q5xI
    • Press the button on the top of the device to release any air trapped inside.

Conclusion

You have now successfully replaced your water filter.

Tahj Ramirez

Member since: 08/07/20

223 Reputation

0 comments