How to DEFLATE with a command line tool to extract a git object?

Question

I'm looking for a command line wrapper for the DEFLATE algorithm.

I have a file (git blob) that is compressed using DEFLATE, and I want to uncompress it. The gzip command does not seem to have an option to directly use the DEFLATE algorithm, rather than the gzip format.

Ideally I'm looking for a standard Unix/Linux tool that can do this.

edit: This is the output I get when trying to use gzip for my problem:

$ cat .git/objects/c0/fb67ab3fda7909000da003f4b2ce50a53f43e7 | gunzip

gzip: stdin: not in gzip format

Answer 1

You can do this with the OpenSSL command line tool:

openssl zlib -d < $IN > $OUT

Unfortunately, at least on Ubuntu, the zlib subcommand is disabled in the default build configuration (--no-zlib --no-zlib-dynamic), so you would need to compile openssl from source to use it. But it is enabled by default on Arch, for example.

Edit: Seems like the zlib command is no longer supported on Arch either. This answer might not be useful anymore :(

Answer 2

Something like the following will print the raw content, including the "$type $length\0" header:

perl -MCompress::Zlib -e 'undef $/; print uncompress(<>)' \
     < .git/objects/27/de0a1dd5a89a94990618632967a1c86a82d577

Answer 3

pythonic one-liner:

$> python -c "import zlib,sys;print \
           repr(zlib.decompress(sys.stdin.read()))" < $IN

Answer 4

UPDATE: Mark Adler noted that git blobs are not raw DEFLATE streams, but zlib streams. These can be unpacked by the pigz tool, which comes pre-packaged in several Linux distributions:

$ cat foo.txt 
file foo.txt!

$ git ls-files -s foo.txt
100644 7a79fc625cac65001fb127f468847ab93b5f8b19 0   foo.txt

$ pigz -d < .git/objects/7a/79fc625cac65001fb127f468847ab93b5f8b19 
blob 14file foo.txt!

Edit by kriegaex: Git Bash for Windows users will notice that pigz is unavailable by default. You can find precompiled 32/64-bit versions here. I tried the 64-bit version and it works nicely. You can e.g. copy pigz.exe directly to c:\Program Files\Git\usr\bin in order to put it on the path.

Edit by mjaggard: Homebrew and Macports both have pigz available so you can install with brew install pigz or sudo port install pigz (if you do not have it already, you can install Homebrew by following the instructions on their website)

---

My original answer, kept for historical reasons:

If I understand the hint in the Wikipedia article mentioned by Marc van Kempen, you can use puff.c from zlib directly.

This is a small example:

#include <assert.h>
#include <string.h>
#include "puff.h"

int main( int argc, char **argv ) {
    unsigned char dest[ 5 ];
    unsigned long destlen = 4;
    const unsigned char *source = "\x4B\x2C\x4E\x49\x03\x00";
    unsigned long sourcelen = 6;    
    assert( puff( dest, &destlen, source, &sourcelen ) == 0 );
    dest[ 4 ] = '\0';
    assert( strcmp( dest, "asdf" ) == 0 );
}

Answer 5

You can use zlib-flate, like this:

cat .git/objects/c0/fb67ab3fda7909000da003f4b2ce50a53f43e7 \
    | zlib-flate -uncompress; echo

It's there by default on my machine, but it's part of qpdf - tools for and transforming and inspecting PDF files if you need to install it.

I've popped an echo on the end of the command, as it's easier to read the output that way.

Answer 6

Try the following command:

printf "\x1f\x8b\x08\x00\x00\x00\x00\x00" | cat - .git/objects/c0/fb67ab3fda7909000da003f4b2ce50a53f43e7 | gunzip

No external tools are needed.

^{Source: How to uncompress zlib data in UNIX? at unix SE}

Answer 7

Here is a Ruby one-liner ( cd .git/ first and identify path to any object ):

ruby -rzlib -e 'print Zlib::Inflate.new.inflate(STDIN.read)' < ./74/c757240ec596063af8cd273ebd9f67073e1208

Answer 8

I got tired of not having a good solution for this, so I put something on NPM:

https://github.com/jezell/zlibber

Now can just pipe to inflate / deflate command.

Answer 9

Here's a example of breaking open a commit object in Python:

$ git show
commit 0972d7651ff85bedf464fba868c2ef434543916a
# all the junk in my commit...
$ python
>>> import zlib
>>> file = open(".git/objects/09/72d7651ff85bedf464fba868c2ef434543916a")
>>> data = file.read()
>>> print data
# binary garbage
>>> unzipped_data = zlib.decompress(data)
>>> print unzipped_data
# all the junk in my commit!

What you will see there is almost identical to the output of 'git cat-file -p [hash]', except that command doesn't print the header ('commit' followed by the size of the content and a null byte).

Answer 10

git objects are compressed by zlib rather than gzip, so either using zlib to uncompress it, or git command, i.e. git cat-file -p <SHA1>, to print content.

Answer 11

Looks like Mark Adler has us in mind and wrote an example of just how to do this with: http://www.zlib.net/zpipe.c

It compiles with nothing more than gcc -lz and the zlib headers installed. I copied the resulting binary to my /usr/local/bin/zpipe while working with git stuff.

Answer 12

// save this as deflate.go

package main

import (
    "compress/zlib"
    "io"
    "os"
    "flag"
)

var infile = flag.String("f", "", "infile")

func main() {
    flag.Parse()
    file, _ := os.Open(*infile)

    r, err := zlib.NewReader(file)
    if err != nil {
        panic(err)
    }
    io.Copy(os.Stdout, r)

    r.Close()
}

---

$ go build deflate.go
$ ./deflate -f .git/objects/c0/fb67ab3fda7909000da003f4b2ce50a53f43e7

Answer 13

pigz can do it:

apt-get install pigz
unpigz -c .git/objects/c0/fb67ab3fda7909000da003f4b2ce50a53f43e7

Answer 14

git objects are zlib streams (not raw deflate). pigz will decompress those with the -dz option.

Answer 15

I have repeatedly come across this problem and it seems almost all of answers on the Internet are either wrong, require compiling some less than ideal code, or downloading a whole slew of dependencies untracked by the system! But I found a real solution. It uses PERL since PERL is readily available on most systems.

From a Bash-alike shell:

perl -mIO::Uncompress::RawInflate=rawinflate -erawinflate'"-","-"'

Or, if you're exec/fork-ing manually (without shell quotes, but line separated):

• perl
• -mIO::Uncompress::RawInflate=rawinflate
• -erawinflate"-","-"

Big caveat: If the stream doesn't start off as a valid DEFLATE stream (such as say, uncompressed data), then this command will happily pipe all the data through untouched. Only if the stream begins as a valid DEFLATE stream (with a valid dictionary I suppose? I'm not too sure...), then this command will error somehow. In some situations this may be desirable however.

Hope this helps any time travelers.

References:

PERL IO::Uncompress::RawInflate::rawinflate

Answer 16

I found this question looking for a work-around with a bug with the -text utility in the new version of the hadoop dfs client I just installed. The -text utility works like cat, except if the file being read is compressed, it transparently decompresses and outputs the plain-text (hence the name).

The answers already posted were definitely helpful, but some of them have one problem when dealing with Hadoop-sized amounts of data - they read everything into memory before decompressing.

So, here are my variations on the Perl and Python answers above that do not have that limitation:

Python:

hadoop fs -cat /path/to/example.deflate |
  python -c 'import zlib,sys;map(lambda b:sys.stdout.write(zlib.decompress(b)),iter(lambda:sys.stdin.read(4096),""))'

Perl:

hadoop fs -cat /path/to/example.deflate |
  perl -MCompress::Zlib -e 'print uncompress($buf) while sysread(STDIN,$buf,4096)'

Note the use of the -cat sub-command, instead of -text. This is so that my work-around does not break after they've fixed the bug. Apologies for the readability of the python version.

Answer 17

See http://en.wikipedia.org/wiki/DEFLATE#Encoder_implementations

It lists a number of software implementations, including gzip, so that should work. Did you try just running gzip on the file? Does it not recognize the format automatically?

How do you know it is compressed using DEFLATE? What tool was used to compress the file?

Answer 18

Why don't you just use git's tools to access the data? This should be able to read any git object:

git show --pretty=raw <object SHA-1>

Answer 19

To add to the collection, here are perl one-liners for deflate/inflate/raw deflate/raw inflate.

Deflate

perl -MIO::Compress::Deflate -e 'undef $/; my ($in, $out) = (<>, undef); IO::Compress::Deflate::deflate(\$in, \$out); print $out;'

Inflate

perl -MIO::Uncompress::Inflate -e 'undef $/; my ($in, $out) = (<>, undef); IO::Uncompress::Inflate::inflate(\$in, \$out); print $out;'

Raw deflate

perl -MIO::Compress::RawDeflate -e 'undef $/; my ($in, $out) = (<>, undef); IO::Compress::RawDeflate::rawdeflate(\$in, \$out); print $out;'

Raw inflate

perl -MIO::Uncompress::RawInflate -e 'undef $/; my ($in, $out) = (<>, undef); IO::Uncompress::RawInflate::rawinflate(\$in, \$out); print $out;'

Answer 20

This is how I do it with Powershell.

$fs = New-Object IO.FileStream((Resolve-Path $Path), [IO.FileMode]::Open, [IO.FileAccess]::Read)
$fs.Position = 2
$cs = New-Object IO.Compression.DeflateStream($fs, [IO.Compression.CompressionMode]::Decompress)
$sr = New-Object IO.StreamReader($cs)
$sr.ReadToEnd()

You can then create an alias like:

function func_deflate{
    param(
        [Parameter(Mandatory=$true, ValueFromPipeline = $true)]
        [ValidateScript({Test-Path $_ -PathType leaf})]
        [string]$Path
    )
    $ErrorActionPreference = 'Stop'    
    $fs = New-Object IO.FileStream((Resolve-Path $Path), [IO.FileMode]::Open, [IO.FileAccess]::Read)
    $fs.Position = 2
    $cs = New-Object IO.Compression.DeflateStream($fs, [IO.Compression.CompressionMode]::Decompress)
    $sr = New-Object IO.StreamReader($cs)
    return $sr.ReadToEnd()
}

Set-Alias -Name deflate -Value func_deflate

Answer 21

Python3 oneliner:

python3 -c "import zlib,sys; sys.stdout.buffer.write(zlib.decompress(sys.stdin.buffer.read()))" < infile > outfile

This way the contents is handled as binary data, avoiding conversion to/from unicode.

Answer 22

const zlib = require("zlib");
const adler32 = require("adler32");
const data = "hello world~!";
const chksum = adler32.sum(new Buffer(data)).toString(16);
console.log("789c",zlib.deflateRawSync(data).toString("hex"),chksum);
// or
console.log(zlib.deflateSync(data).toString("hex"));