Which characters are valid in CSS class names/selectors?

Question

What characters/symbols are allowed within the CSS class selectors?

I know that the following characters are invalid, but what characters are valid?

~ ! @ $ % ^ & * ( ) + = , . / ' ; : " ? > < [ ] \ { } | ` #

Answer 1

You can check directly at the CSS grammar.

Basically¹, a name must begin with an underscore (_), a hyphen (-), or a letter(a–z), followed by any number of hyphens, underscores, letters, or numbers. There is a catch: if the first character is a hyphen, the second character must² be a letter or underscore, and the name must be at least 2 characters long.

-?[_a-zA-Z]+[_a-zA-Z0-9-]*

In short, the previous rule translates to the following, extracted from the W3C specification:

In CSS, identifiers (including element names, classes, and IDs in selectors) can contain only the characters [a-z0-9] and ISO 10646 characters U+00A0 and higher, plus the hyphen (-) and the underscore (_); they cannot start with a digit, or a hyphen followed by a digit. Identifiers can also contain escaped characters and any ISO 10646 character as a numeric code (see next item). For instance, the identifier "B&W?" may be written as "B&W?" or "B\26 W\3F".

Identifiers beginning with a hyphen or underscore are typically reserved for browser-specific extensions, as in -moz-opacity.

¹ It's all made a bit more complicated by the inclusion of escaped Unicode characters (that no one really uses).

² Note that, according to the grammar I linked, a rule starting with two hyphens, e.g., --indent1, is invalid. However, I'm pretty sure I've seen this in practice.

Answer 2

To my surprise most answers here are wrong. It turns out that:

Any character except NUL is allowed in CSS class names in CSS. (If CSS contains NUL (escaped or not), the result is undefined. [CSS-characters]) In HTML though, permanently unassigned codepoints are not permitted either. Neither does HTML have a way to include space characters (space, tab, line feed, form feed and carriage return) in a class name attribute, because those are class lists and spaces are used here to separate class names from each other.

Mathias Bynens' answer links to explanation and demos showing how to use these names. Written down in CSS code, a class name may need escaping, but that doesn’t change the class name. E.g. an unnecessarily over-escaped representation will look different from other representations of that name, but it still refers to the same class name.

Most other (programming) languages don’t have that concept of escaping variable names (“identifiers”), so all representations of a variable have to look the same. This is not the case in CSS.

So, if you need to turn a random string into a CSS class name: take care of NUL and space, and escape (accordingly for CSS or HTML). Done.

Answer 3

I’ve answered your question in-depth at CSS character escape sequences. The article also explains how to escape any character in CSS (and JavaScript), and I made a handy tool for this as well. From that page:

If you were to give an element an ID value of ~!@$%^&*()_+-=,./';:"?><[]{}|`#, the selector would look like this:

CSS:

<style>
  #\~\!\@\$\%\^\&\*\(\)\_\+-\=\,\.\/\'\;\:\"\?\>\<\[\]\\\{\}\|\`\#
  {
    background: hotpink;
  }
</style>

JavaScript:

<script>
  // document.getElementById or similar
  document.getElementById('~!@$%^&*()_+-=,./\';:"?><[]\\{}|`#');
  // document.querySelector or similar
  $('#\\~\\!\\@\\$\\%\\^\\&\\*\\(\\)\\_\\+-\\=\\,\\.\\/\\\'\\;\\:\\"\\?\\>\\<\\[\\]\\\\\\{\\}\\|\\`\\#');
</script>

Answer 4

Read the W3C spec. (this is CSS 2.1; find the appropriate version for your assumption of browsers)

relevant paragraph:

In CSS, identifiers (including element names, classes, and IDs in selectors) can contain only the characters [a-z0-9] and ISO 10646 characters U+00A1 and higher, plus the hyphen (-) and the underscore (_); they cannot start with a digit, or a hyphen followed by a digit. Identifiers can also contain escaped characters and any ISO 10646 character as a numeric code (see next item). For instance, the identifier "B&W?" may be written as "B&W?" or "B\26 W\3F".

As @mipadi points out in Kenan Banks's answer, there's this caveat, also in the same webpage:

In CSS, identifiers may begin with '-' (dash) or '_' (underscore). Keywords and property names beginning with '-' or '_' are reserved for vendor-specific extensions. Such vendor-specific extensions should have one of the following formats:

'-' + vendor identifier + '-' + meaningful name
'_' + vendor identifier + '-' + meaningful name

Example(s):

For example, if XYZ organization added a property to describe the color of the border on the East side of the display, they might call it -xyz-border-east-color.

Other known examples:

-moz-box-sizing
-moz-border-radius
-wap-accesskey

An initial dash or underscore is guaranteed never to be used in a property or keyword by any current or future level of CSS. Thus typical CSS implementations may not recognize such properties and may ignore them according to the rules for handling parsing errors. However, because the initial dash or underscore is part of the grammar, CSS 2.1 implementers should always be able to use a CSS-conforming parser, whether or not they support any vendor-specific extensions.

Authors should avoid vendor-specific extensions

Answer 5

The complete regular expression is:

-?(?:[_a-z]|[\200-\377]|\\[0-9a-f]{1,6}(\r\n|[ \t\r\n\f])?|\\[^\r\n\f0-9a-f])(?:[_a-z0-9-]|[\200-\377]|\\[0-9a-f]{1,6}(\r\n|[ \t\r\n\f])?|\\[^\r\n\f0-9a-f])*

So all of your listed characters, except “-” and “_” are not allowed if used directly. But you can encode them using a backslash foo\~bar or using the Unicode notation foo\7E bar.

Answer 6

For those looking for a workaround, you can use an attribute selector, for instance, if your class begins with a number. Change:

.000000-8{background:url(../../images/common/000000-0.8.png);} /* DOESN'T WORK!! */

to this:

[class="000000-8"]{background:url(../../images/common/000000-0.8.png);} /* WORKS :) */

Also, if there are multiple classes, you will need to specify them in selector or use the ~= operator:

[class~="000000-8"]{background:url(../../images/common/000000-0.8.png);}

Sources:

1. https://benfrain.com/when-and-where-you-can-use-numbers-in-id-and-class-names/
2. Is there a workaround to make CSS classes with names that start with numbers valid?
3. https://developer.mozilla.org/en-US/docs/Web/CSS/Attribute_selectors

Answer 7

I would not recommend to use anything except A-z, _- and 0-9, while it's just easier to code with those symbols. Also do not start classes with - while those classes are usually browser-specific flags. To avoid any issues with IDE autocompletion, less complexity when you may need to generate those class names with some other code for whatever reason. Maybe some transpiling software may not work, etc., etc.

Yet CSS is quite loose on this. You can use any symbol, and even emoji works.

<style>
  . {
    border: 2px solid blue;
    width: 100px;
    height: 100px;
    overflow: hidden;
  }
</style>

<div class="">
  
</div>

Answer 8

My understanding is that the underscore is technically valid. Check out:

https://developer.mozilla.org/en/underscores_in_class_and_id_names

"...errata to the specification published in early 2001 made underscores legal for the first time."

The article linked above says never use them, then gives a list of browsers that don't support them, all of which are, in terms of numbers of users at least, long-redundant.

Answer 9

For HTML5 and CSS 3, classes and IDs can start with numbers.

Answer 10

We can use all characters in a class name. Even characters like # and .. We just have to escape them with \ (backslash).

.test\.123 {
  color: red;
}

.test\#123 {
  color: blue;
}

.test\@123 {
  color: green;
}

.test\<123 {
  color: brown;
}

.test\`123 {
  color: purple;
}

.test\~123 {
  color: tomato;
}

<div class="test.123">test.123</div>
<div class="test#123">test#123</div>
<div class="test@123">test@123</div>
<div class="test<123">test<123</div>
<div class="test`123">test`123</div>
<div class="test~123">test~123</div>

Answer 11

Going off of Kenan Banks's answer, you can use the following two regex matches to make a string valid:

[^a-z0-9A-Z_-]

This is a reverse match that selects anything that isn't a letter, number, dash or underscore for easy removal.

^-*[0-9]+

This matches 0 or 1 dashes followed by 1 or more numbers at the beginning of a string, also for easy removal.

How I use it in PHP:

// Make alphanumeric with dashes and underscores (removes all other characters)
$class = preg_replace("/[^a-z0-9A-Z_-]/", "", $class);

// Classes only begin with an underscore or letter
$class = preg_replace("/^-*[0-9]+/", "", $class);

// Make sure the string is two or more characters long
return 2 <= strlen($class) ? $class : '';