stringExp = "2^4"
intVal = int(stringExp) # Expected value: 16
This returns the following error:
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ValueError: invalid literal for int()
with base 10: '2^4'
I know that eval can work around this, but isn't there a better and - more importantly - safer method to evaluate a mathematical expression that is being stored in a string?
eval is evileval("__import__('os').remove('important file')") # arbitrary commands
eval("9**9**9**9**9**9**9**9", {'__builtins__': None}) # CPU, memory
Note: even if you use set __builtins__ to None it still might be possible to break out using introspection:
eval('(1).__class__.__bases__[0].__subclasses__()', {'__builtins__': None})
astimport ast
import operator as op
# supported operators
operators = {ast.Add: op.add, ast.Sub: op.sub, ast.Mult: op.mul,
ast.Div: op.truediv, ast.Pow: op.pow, ast.BitXor: op.xor,
ast.USub: op.neg}
def eval_expr(expr):
"""
>>> eval_expr('2^6')
4
>>> eval_expr('2**6')
64
>>> eval_expr('1 + 2*3**(4^5) / (6 + -7)')
-5.0
"""
return eval_(ast.parse(expr, mode='eval').body)
def eval_(node):
if isinstance(node, ast.Num): # <number>
return node.n
elif isinstance(node, ast.BinOp): # <left> <operator> <right>
return operators[type(node.op)](eval_(node.left), eval_(node.right))
elif isinstance(node, ast.UnaryOp): # <operator> <operand> e.g., -1
return operators[type(node.op)](eval_(node.operand))
else:
raise TypeError(node)
You can easily limit allowed range for each operation or any intermediate result, e.g., to limit input arguments for a**b:
def power(a, b):
if any(abs(n) > 100 for n in [a, b]):
raise ValueError((a,b))
return op.pow(a, b)
operators[ast.Pow] = power
Or to limit magnitude of intermediate results:
import functools
def limit(max_=None):
"""Return decorator that limits allowed returned values."""
def decorator(func):
@functools.wraps(func)
def wrapper(*args, **kwargs):
ret = func(*args, **kwargs)
try:
mag = abs(ret)
except TypeError:
pass # not applicable
else:
if mag > max_:
raise ValueError(ret)
return ret
return wrapper
return decorator
eval_ = limit(max_=10**100)(eval_)
>>> evil = "__import__('os').remove('important file')"
>>> eval_expr(evil) #doctest:+IGNORE_EXCEPTION_DETAIL
Traceback (most recent call last):
...
TypeError:
>>> eval_expr("9**9")
387420489
>>> eval_expr("9**9**9**9**9**9**9**9") #doctest:+IGNORE_EXCEPTION_DETAIL
Traceback (most recent call last):
...
ValueError:
Pyparsing can be used to parse mathematical expressions. In particular, fourFn.py shows how to parse basic arithmetic expressions. Below, I've rewrapped fourFn into a numeric parser class for easier reuse.
from __future__ import division
from pyparsing import (Literal, CaselessLiteral, Word, Combine, Group, Optional,
ZeroOrMore, Forward, nums, alphas, oneOf)
import math
import operator
__author__ = 'Paul McGuire'
__version__ = '$Revision: 0.0 $'
__date__ = '$Date: 2009-03-20 $'
__source__ = '''http://pyparsing.wikispaces.com/file/view/fourFn.py
http://pyparsing.wikispaces.com/message/view/home/15549426
'''
__note__ = '''
All I've done is rewrap Paul McGuire's fourFn.py as a class, so I can use it
more easily in other places.
'''
class NumericStringParser(object):
'''
Most of this code comes from the fourFn.py pyparsing example
'''
def pushFirst(self, strg, loc, toks):
self.exprStack.append(toks[0])
def pushUMinus(self, strg, loc, toks):
if toks and toks[0] == '-':
self.exprStack.append('unary -')
def __init__(self):
"""
expop :: '^'
multop :: '*' | '/'
addop :: '+' | '-'
integer :: ['+' | '-'] '0'..'9'+
atom :: PI | E | real | fn '(' expr ')' | '(' expr ')'
factor :: atom [ expop factor ]*
term :: factor [ multop factor ]*
expr :: term [ addop term ]*
"""
point = Literal(".")
e = CaselessLiteral("E")
fnumber = Combine(Word("+-" + nums, nums) +
Optional(point + Optional(Word(nums))) +
Optional(e + Word("+-" + nums, nums)))
ident = Word(alphas, alphas + nums + "_$")
plus = Literal("+")
minus = Literal("-")
mult = Literal("*")
div = Literal("/")
lpar = Literal("(").suppress()
rpar = Literal(")").suppress()
addop = plus | minus
multop = mult | div
expop = Literal("^")
pi = CaselessLiteral("PI")
expr = Forward()
atom = ((Optional(oneOf("- +")) +
(ident + lpar + expr + rpar | pi | e | fnumber).setParseAction(self.pushFirst))
| Optional(oneOf("- +")) + Group(lpar + expr + rpar)
).setParseAction(self.pushUMinus)
# by defining exponentiation as "atom [ ^ factor ]..." instead of
# "atom [ ^ atom ]...", we get right-to-left exponents, instead of left-to-right
# that is, 2^3^2 = 2^(3^2), not (2^3)^2.
factor = Forward()
factor << atom + \
ZeroOrMore((expop + factor).setParseAction(self.pushFirst))
term = factor + \
ZeroOrMore((multop + factor).setParseAction(self.pushFirst))
expr << term + \
ZeroOrMore((addop + term).setParseAction(self.pushFirst))
# addop_term = ( addop + term ).setParseAction( self.pushFirst )
# general_term = term + ZeroOrMore( addop_term ) | OneOrMore( addop_term)
# expr << general_term
self.bnf = expr
# map operator symbols to corresponding arithmetic operations
epsilon = 1e-12
self.opn = {"+": operator.add,
"-": operator.sub,
"*": operator.mul,
"/": operator.truediv,
"^": operator.pow}
self.fn = {"sin": math.sin,
"cos": math.cos,
"tan": math.tan,
"exp": math.exp,
"abs": abs,
"trunc": lambda a: int(a),
"round": round,
"sgn": lambda a: abs(a) > epsilon and cmp(a, 0) or 0}
def evaluateStack(self, s):
op = s.pop()
if op == 'unary -':
return -self.evaluateStack(s)
if op in "+-*/^":
op2 = self.evaluateStack(s)
op1 = self.evaluateStack(s)
return self.opn[op](op1, op2)
elif op == "PI":
return math.pi # 3.1415926535
elif op == "E":
return math.e # 2.718281828
elif op in self.fn:
return self.fn[op](self.evaluateStack(s))
elif op[0].isalpha():
return 0
else:
return float(op)
def eval(self, num_string, parseAll=True):
self.exprStack = []
results = self.bnf.parseString(num_string, parseAll)
val = self.evaluateStack(self.exprStack[:])
return val
You can use it like this
nsp = NumericStringParser()
result = nsp.eval('2^4')
print(result)
# 16.0
result = nsp.eval('exp(2^4)')
print(result)
# 8886110.520507872
Some safer alternatives to eval() and sympy.sympify().evalf()*:
*SymPy sympify is also unsafe according to the following warning from the documentation.
Warning: Note that this function uses
eval, and thus shouldn’t be used on unsanitized input.
The reason eval and exec are so dangerous is that the default compile function will generate bytecode for any valid python expression, and the default eval or exec will execute any valid python bytecode. All the answers to date have focused on restricting the bytecode that can be generated (by sanitizing input) or building your own domain-specific-language using the AST.
Instead, you can easily create a simple eval function that is incapable of doing anything nefarious and can easily have runtime checks on memory or time used. Of course, if it is simple math, than there is a shortcut.
c = compile(stringExp, 'userinput', 'eval')
if c.co_code[0]==b'd' and c.co_code[3]==b'S':
return c.co_consts[ord(c.co_code[1])+ord(c.co_code[2])*256]
The way this works is simple, any constant mathematic expression is safely evaluated during compilation and stored as a constant. The code object returned by compile consists of d, which is the bytecode for LOAD_CONST, followed by the number of the constant to load (usually the last one in the list), followed by S, which is the bytecode for RETURN_VALUE. If this shortcut doesn't work, it means that the user input isn't a constant expression (contains a variable or function call or similar).
This also opens the door to some more sophisticated input formats. For example:
stringExp = "1 + cos(2)"
This requires actually evaluating the bytecode, which is still quite simple. Python bytecode is a stack oriented language, so everything is a simple matter of TOS=stack.pop(); op(TOS); stack.put(TOS) or similar. The key is to only implement the opcodes that are safe (loading/storing values, math operations, returning values) and not unsafe ones (attribute lookup). If you want the user to be able to call functions (the whole reason not to use the shortcut above), simple make your implementation of CALL_FUNCTION only allow functions in a 'safe' list.
from dis import opmap
from Queue import LifoQueue
from math import sin,cos
import operator
globs = {'sin':sin, 'cos':cos}
safe = globs.values()
stack = LifoQueue()
class BINARY(object):
def __init__(self, operator):
self.op=operator
def __call__(self, context):
stack.put(self.op(stack.get(),stack.get()))
class UNARY(object):
def __init__(self, operator):
self.op=operator
def __call__(self, context):
stack.put(self.op(stack.get()))
def CALL_FUNCTION(context, arg):
argc = arg[0]+arg[1]*256
args = [stack.get() for i in range(argc)]
func = stack.get()
if func not in safe:
raise TypeError("Function %r now allowed"%func)
stack.put(func(*args))
def LOAD_CONST(context, arg):
cons = arg[0]+arg[1]*256
stack.put(context['code'].co_consts[cons])
def LOAD_NAME(context, arg):
name_num = arg[0]+arg[1]*256
name = context['code'].co_names[name_num]
if name in context['locals']:
stack.put(context['locals'][name])
else:
stack.put(context['globals'][name])
def RETURN_VALUE(context):
return stack.get()
opfuncs = {
opmap['BINARY_ADD']: BINARY(operator.add),
opmap['UNARY_INVERT']: UNARY(operator.invert),
opmap['CALL_FUNCTION']: CALL_FUNCTION,
opmap['LOAD_CONST']: LOAD_CONST,
opmap['LOAD_NAME']: LOAD_NAME
opmap['RETURN_VALUE']: RETURN_VALUE,
}
def VMeval(c):
context = dict(locals={}, globals=globs, code=c)
bci = iter(c.co_code)
for bytecode in bci:
func = opfuncs[ord(bytecode)]
if func.func_code.co_argcount==1:
ret = func(context)
else:
args = ord(bci.next()), ord(bci.next())
ret = func(context, args)
if ret:
return ret
def evaluate(expr):
return VMeval(compile(expr, 'userinput', 'eval'))
Obviously, the real version of this would be a bit longer (there are 119 opcodes, 24 of which are math related). Adding STORE_FAST and a couple others would allow for input like 'x=5;return x+x or similar, trivially easily. It can even be used to execute user-created functions, so long as the user created functions are themselves executed via VMeval (don't make them callable!!! or they could get used as a callback somewhere). Handling loops requires support for the goto bytecodes, which means changing from a for iterator to while and maintaining a pointer to the current instruction, but isn't too hard. For resistance to DOS, the main loop should check how much time has passed since the start of the calculation, and certain operators should deny input over some reasonable limit (BINARY_POWER being the most obvious).
While this approach is somewhat longer than a simple grammar parser for simple expressions (see above about just grabbing the compiled constant), it extends easily to more complicated input, and doesn't require dealing with grammar (compile take anything arbitrarily complicated and reduces it to a sequence of simple instructions).
Okay, so the problem with eval is that it can escape its sandbox too easily, even if you get rid of __builtins__. All the methods for escaping the sandbox come down to using getattr or object.__getattribute__ (via the . operator) to obtain a reference to some dangerous object via some allowed object (''.__class__.__bases__[0].__subclasses__ or similar). getattr is eliminated by setting __builtins__ to None. object.__getattribute__ is the difficult one, since it cannot simply be removed, both because object is immutable and because removing it would break everything. However, __getattribute__ is only accessible via the . operator, so purging that from your input is sufficient to ensure eval cannot escape its sandbox.
In processing formulas, the only valid use of a decimal is when it is preceded or followed by [0-9], so we just remove all other instances of ..
import re
inp = re.sub(r"\.(?![0-9])","", inp)
val = eval(inp, {'__builtins__':None})
Note that while python normally treats 1 + 1. as 1 + 1.0, this will remove the trailing . and leave you with 1 + 1. You could add ),, and EOF to the list of things allowed to follow ., but why bother?
You can use the ast module and write a NodeVisitor that verifies that the type of each node is part of a whitelist.
import ast, math
locals = {key: value for (key,value) in vars(math).items() if key[0] != '_'}
locals.update({"abs": abs, "complex": complex, "min": min, "max": max, "pow": pow, "round": round})
class Visitor(ast.NodeVisitor):
def visit(self, node):
if not isinstance(node, self.whitelist):
raise ValueError(node)
return super().visit(node)
whitelist = (ast.Module, ast.Expr, ast.Load, ast.Expression, ast.Add, ast.Sub, ast.UnaryOp, ast.Num, ast.BinOp,
ast.Mult, ast.Div, ast.Pow, ast.BitOr, ast.BitAnd, ast.BitXor, ast.USub, ast.UAdd, ast.FloorDiv, ast.Mod,
ast.LShift, ast.RShift, ast.Invert, ast.Call, ast.Name)
def evaluate(expr, locals = {}):
if any(elem in expr for elem in '\n#') : raise ValueError(expr)
try:
node = ast.parse(expr.strip(), mode='eval')
Visitor().visit(node)
return eval(compile(node, "<string>", "eval"), {'__builtins__': None}, locals)
except Exception: raise ValueError(expr)
Because it works via a whitelist rather than a blacklist, it is safe. The only functions and variables it can access are those you explicitly give it access to. I populated a dict with math-related functions so you can easily provide access to those if you want, but you have to explicitly use it.
If the string attempts to call functions that haven't been provided, or invoke any methods, an exception will be raised, and it will not be executed.
Because this uses Python's built in parser and evaluator, it also inherits Python's precedence and promotion rules as well.
>>> evaluate("7 + 9 * (2 << 2)")
79
>>> evaluate("6 // 2 + 0.0")
3.0
The above code has only been tested on Python 3.
If desired, you can add a timeout decorator on this function.
Based on Perkins' amazing approach, I've updated and improved his "shortcut" for simple algebraic expressions (no functions or variables). Now it works on Python 3.6+ and avoids some pitfalls:
import re
# Kept outside simple_eval() just for performance
_re_simple_eval = re.compile(rb'd([\x00-\xFF]+)S\x00')
def simple_eval(expr):
try:
c = compile(expr, 'userinput', 'eval')
except SyntaxError:
raise ValueError(f"Malformed expression: {expr}")
m = _re_simple_eval.fullmatch(c.co_code)
if not m:
raise ValueError(f"Not a simple algebraic expression: {expr}")
try:
return c.co_consts[int.from_bytes(m.group(1), sys.byteorder)]
except IndexError:
raise ValueError(f"Expression not evaluated as constant: {expr}")
Testing, using some of the examples in other answers:
for expr, res in (
('2^4', 6 ),
('2**4', 16 ),
('1 + 2*3**(4^5) / (6 + -7)', -5.0 ),
('7 + 9 * (2 << 2)', 79 ),
('6 // 2 + 0.0', 3.0 ),
('2+3', 5 ),
('6+4/2*2', 10.0 ),
('3+2.45/8', 3.30625),
('3**3*3/3+3', 30.0 ),
):
result = simple_eval(expr)
ok = (result == res and type(result) == type(res))
print("{} {} = {}".format("OK!" if ok else "FAIL!", expr, result))
OK! 2^4 = 6
OK! 2**4 = 16
OK! 1 + 2*3**(4^5) / (6 + -7) = -5.0
OK! 7 + 9 * (2 << 2) = 79
OK! 6 // 2 + 0.0 = 3.0
OK! 2+3 = 5
OK! 6+4/2*2 = 10.0
OK! 3+2.45/8 = 3.30625
OK! 3**3*3/3+3 = 30.0
Testing bad input:
for expr in (
'foo bar',
'print("hi")',
'2*x',
'lambda: 10',
'2**1234',
):
try:
result = simple_eval(expr)
except ValueError as e:
print(e)
continue
print("OK!") # will never happen
Malformed expression: foo bar
Not a simple algebraic expression: print("hi")
Expression not evaluated as constant: 2*x
Expression not evaluated as constant: lambda: 10
Expression not evaluated as constant: 2**1234
I think I would use eval(), but would first check to make sure the string is a valid mathematical expression, as opposed to something malicious. You could use a regex for the validation.
eval() also takes additional arguments which you can use to restrict the namespace it operates in for greater security.
[I know this is an old question, but it is worth pointing out new useful solutions as they pop up]
Since python3.6, this capability is now built into the language, coined "f-strings".
See: PEP 498 -- Literal String Interpolation
For example (note the f prefix):
f'{2**4}'
=> '16'
This is a massively late reply, but I think useful for future reference. Rather than write your own math parser (although the pyparsing example above is great) you could use SymPy. I don't have a lot of experience with it, but it contains a much more powerful math engine than anyone is likely to write for a specific application and the basic expression evaluation is very easy:
>>> import sympy
>>> x, y, z = sympy.symbols('x y z')
>>> sympy.sympify("x**3 + sin(y)").evalf(subs={x:1, y:-3})
0.858879991940133
Very cool indeed! A from sympy import * brings in a lot more function support, such as trig functions, special functions, etc., but I've avoided that here to show what's coming from where.
Use eval in a clean namespace:
>>> ns = {'__builtins__': None}
>>> eval('2 ** 4', ns)
16
The clean namespace should prevent injection. For instance:
>>> eval('__builtins__.__import__("os").system("echo got through")', ns)
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "<string>", line 1, in <module>
AttributeError: 'NoneType' object has no attribute '__import__'
Otherwise you would get:
>>> eval('__builtins__.__import__("os").system("echo got through")')
got through
0
You might want to give access to the math module:
>>> import math
>>> ns = vars(math).copy()
>>> ns['__builtins__'] = None
>>> eval('cos(pi/3)', ns)
0.50000000000000011
Here's my solution to the problem without using eval. Works with Python2 and Python3. It doesn't work with negative numbers.
$ python -m pytest test.py
test.py
from solution import Solutions
class SolutionsTestCase(unittest.TestCase):
def setUp(self):
self.solutions = Solutions()
def test_evaluate(self):
expressions = [
'2+3=5',
'6+4/2*2=10',
'3+2.45/8=3.30625',
'3**3*3/3+3=30',
'2^4=6'
]
results = [x.split('=')[1] for x in expressions]
for e in range(len(expressions)):
if '.' in results[e]:
results[e] = float(results[e])
else:
results[e] = int(results[e])
self.assertEqual(
results[e],
self.solutions.evaluate(expressions[e])
)
solution.py
class Solutions(object):
def evaluate(self, exp):
def format(res):
if '.' in res:
try:
res = float(res)
except ValueError:
pass
else:
try:
res = int(res)
except ValueError:
pass
return res
def splitter(item, op):
mul = item.split(op)
if len(mul) == 2:
for x in ['^', '*', '/', '+', '-']:
if x in mul[0]:
mul = [mul[0].split(x)[1], mul[1]]
if x in mul[1]:
mul = [mul[0], mul[1].split(x)[0]]
elif len(mul) > 2:
pass
else:
pass
for x in range(len(mul)):
mul[x] = format(mul[x])
return mul
exp = exp.replace(' ', '')
if '=' in exp:
res = exp.split('=')[1]
res = format(res)
exp = exp.replace('=%s' % res, '')
while '^' in exp:
if '^' in exp:
itm = splitter(exp, '^')
res = itm[0] ^ itm[1]
exp = exp.replace('%s^%s' % (str(itm[0]), str(itm[1])), str(res))
while '**' in exp:
if '**' in exp:
itm = splitter(exp, '**')
res = itm[0] ** itm[1]
exp = exp.replace('%s**%s' % (str(itm[0]), str(itm[1])), str(res))
while '/' in exp:
if '/' in exp:
itm = splitter(exp, '/')
res = itm[0] / itm[1]
exp = exp.replace('%s/%s' % (str(itm[0]), str(itm[1])), str(res))
while '*' in exp:
if '*' in exp:
itm = splitter(exp, '*')
res = itm[0] * itm[1]
exp = exp.replace('%s*%s' % (str(itm[0]), str(itm[1])), str(res))
while '+' in exp:
if '+' in exp:
itm = splitter(exp, '+')
res = itm[0] + itm[1]
exp = exp.replace('%s+%s' % (str(itm[0]), str(itm[1])), str(res))
while '-' in exp:
if '-' in exp:
itm = splitter(exp, '-')
res = itm[0] - itm[1]
exp = exp.replace('%s-%s' % (str(itm[0]), str(itm[1])), str(res))
return format(exp)
Using lark parser library https://stackoverflow.com/posts/67491514/edit
from operator import add, sub, mul, truediv, neg, pow
from lark import Lark, Transformer, v_args
calc_grammar = f"""
?start: sum
?sum: product
| sum "+" product -> {add.__name__}
| sum "-" product -> {sub.__name__}
?product: power
| product "*" power -> {mul.__name__}
| product "/" power -> {truediv.__name__}
?power: atom
| power "^" atom -> {pow.__name__}
?atom: NUMBER -> number
| "-" atom -> {neg.__name__}
| "(" sum ")"
%import common.NUMBER
%import common.WS_INLINE
%ignore WS_INLINE
"""
@v_args(inline=True)
class CalculateTree(Transformer):
add = add
sub = sub
neg = neg
mul = mul
truediv = truediv
pow = pow
number = float
calc_parser = Lark(calc_grammar, parser="lalr", transformer=CalculateTree())
calc = calc_parser.parse
def eval_expr(expression: str) -> float:
return calc(expression)
print(eval_expr("2^4"))
print(eval_expr("-1*2^4"))
print(eval_expr("-2^3 + 1"))
print(eval_expr("2**4")) # Error
I came here looking for a mathematic expression parser as well. Reading through some of the answers and looking up libraries, I came across py-expression which I am now using. It basically handles a lot of operators and formula constructs, but if you're missing something you can easily add new operators/functions to it.
The basic syntax is:
from py_expression.core import Exp
exp = Exp()
parsed_formula = exp.parse('a+4')
result = exp.eval(parsed_formula, {"a":2})
The only issue that I've had with it so far is that it doesn't come with built-in mathematical constants nor a mechanism to add them in. I just proposed a solution to that however: https://github.com/FlavioLionelRita/py-expression/issues/7
