SmartFusion is a family of microcontrollers with an integrated FPGA of Actel. The device includes an ARM Cortex-M3 hard processor core (with up to 512kB of flash and 64kB of RAM) and analog peripherals such as a multi-channel ADC and DACs in addition to their flash-based FPGA fabric.[1]

Models

Model number FPGA Fabric Microcontroller Subsystem (MSS)
System Gates Tiles (D-Flip-Flops) RAM Blocks (4,608 bits) Flash SRAM
A2F060 60,000 1,536 8 128 Kb 16 Kb
A2F200 200,000 4,608 8 256 Kb 64 Kb
A2F500 500,000 11,520 24 512 Kb 64 Kb

Development Hardware

Actel also sells two development boards that include an SmartFusion chip. One is the SmartFusion Evaluation Kit which is a low cost board with an SmartFusion A2F200 and sold for $99.[2] Another is the SmartFusion Development Kit which is a fully featured board with an SmartFusion A2F500 and is sold for $999 .[3]

Development tools

Documentation

The amount of documentation for all ARM chips is daunting, especially for newcomers. The documentation for microcontrollers from past decades would easily be inclusive in a single document, but as chips have evolved so has the documentation grown. The total documentation is especially hard to grasp for all ARM chips since it consists of documents from the IC manufacturer (Actel) and documents from CPU core vendor (ARM Holdings).

A typical top-down documentation tree is: manufacturer website, manufacturer marketing slides, manufacturer datasheet for the exact physical chip, manufacturer detailed reference manual that describes common peripherals and aspects of a physical chip family, ARM core generic user guide, ARM core technical reference manual, ARM architecture reference manual that describes the instruction set(s).

SmartFusion documentation tree (top to bottom)
  1. SmartFusion website.
  2. SmartFusion marketing slides.
  3. SmartFusion datasheets.
  4. SmartFusion reference manuals.
  5. ARM core website.
  6. ARM core generic user guide.
  7. ARM core technical reference manual.
  8. ARM architecture reference manual.

Actel has additional documents, such as: evaluation board user manuals, application notes, getting started guides, software library documents, errata, and more. See External Links section for links to official STM32 and ARM documents.

See also

References

  1. "SmartFusion customizable system-on-chip (CSoC) - Microsemi". Archived from the original on 2012-03-15. Retrieved 2012-03-18.
  2. "SmartFusion Evaluation Kit | Development Kits - Microsemi". Archived from the original on 2012-03-15. Retrieved 2012-03-18.
  3. "SmartFusion Development Kit | Development Kits - Actel". Archived from the original on 2012-03-30. Retrieved 2012-03-18.

Further reading

SmartFusion Official Documents
ARM Official Documents
Other
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.