9

In the s3fs instruction wiki, we were told that we could auto mount s3fs buckets by entering the following line to /etc/fstab

s3fs#mybucket /mnt/mybucket fuse    allow_other,use_cache=/tmp,url=https://s3.amazonaws.com 0 0

This works fine for 1 bucket, but when I try to mount multiple buckets onto 1 EC2 instance by having 2 lines:

s3fs#mybucket /mnt/mybucket fuse    allow_other,use_cache=/tmp 0 0
s3fs#mybucket2 /mnt/mybucket2 fuse    allow_other,use_cache=/tmp 0 0

only the second line works I tried duplicating s3fs to s3fs2 and to:

s3fs#mybucket /mnt/mybucket fuse    allow_other,use_cache=/tmp 0 0
s3fs2#mybucket2 /mnt/mybucket2 fuse    allow_other,use_cache=/tmp 0 0

but this still does not work. only the second one gets mounted:

How do I automatically mount multiple s3 bucket via s3fs in /etc/fstab without manually using:

s3fs mybucket /mn/mybucket2-ouse_cache=/tmp
slm
  • 15,396
  • 12
  • 109
  • 124
Ryan Cheng
  • 151
  • 1
  • 1
  • 6

5 Answers5

15

Perhaps your network wasn't up?

Minimal entry - with only one option (_netdev = Mount after network is 'up')

<bucket name> <mount point> fuse.s3fs _netdev, 0 0

I am running Ubuntu 16.04 and multiple mounts works fine in /etc/fstab.

Example similar to what I use for ftp image uploads (tested with extra bucket mount point):

mybucket1.mydomain.org /mnt/mybucket1 fuse.s3fs _netdev,allow_other,passwd_file=/home/ftpuser/.passwd-aws-s3fs,default_acl=public-read,uid=1001,gid=65534   0 0

mybucket2.mydomain.org /mnt/mybucket2 fuse.s3fs _netdev,allow_other,passwd_file=/home/ftpuser/.passwd-aws-s3fs,default_acl=public-read,uid=1001,gid=65534   0 0

sudo mount -a to test the new entries and mount them (then do a reboot test).

If you wish to mount as non-root, look into the UID,GID options as per above. This isn't absolutely necessary if using the fuse option allow_other as the permissions are '0777' on mounting.

WARNING: Updatedb (the locate command uses this) indexes your system. You should check that either PRUNEFS or PRUNEPATHS in /etc/updatedb.conf covers either your s3fs filesystem or s3fs mount point. The default is to 'prune' any s3fs filesystems, but it's worth checking. Otherwise, not only will your system slow down if you have many files in the bucket, but your AWS bill will increase. See the FAQ link for more.

Reference:
https://github.com/s3fs-fuse/s3fs-fuse/wiki/Fuse-Over-Amazon
https://github.com/s3fs-fuse/s3fs-fuse/wiki/FAQ

B. Shea
  • 829
  • 14
  • 29
1

this may not be the cleanest way, but I had the same problem and solved it this way:

1. Create a mount script

Simple enough, just create a .sh file in the home directory for the user that needs the buckets mounted (in my case it was /home/webuser and I named the script mountme.sh)

The content of the file was one line per bucket to be mounted:

s3fs bucket_one /home/webuser/app/www/bucket_one -o url=https://nyc3.digitaloceanspaces.com -o allow_other
s3fs bucket_two /home/webuser/app/www/bucket_two -o url=https://nyc3.digitaloceanspaces.com -o allow_other

(yes, I'm using DigitalOcean spaces, but they work exactly like S3 Buckets with s3fs)

2. Cron your way into running the mount script upon reboot

I set a cron for the same webuser user with:

@reboot /bin/sh /home/webuser/mountme.sh

(yes, you can predefine the /bin/sh path and whatnot, but I was feeling lazy that day)

I know this is more a workaround than a solution but I became frustrated with fstab very quickly so I fell back to good old cron, where I feel much more comfortable :)

Javier Larroulet
  • 3,047
  • 3
  • 13
  • 30
1

This is what I am doing with Ubuntu 18.04 and DigitalOcean Spaces

In /etc/fstab

s3fs#<space>  /<dir> fuse _netdev,allow_other,use_cache=/tmp/cache,uid=<usr>,gid=<grp>,url=https://<url> 0 0

.passwd-s3fs is in root's homedir with appropriate stuff in it

Dave
  • 11
  • 1
0

You may try a startup script. This is how I got around issues I was having mounting my s3fs at boot time with /etc/fstab.

How to make startup scripts varies with distributions, but there is a lot of information out there on the subject.

user2344549
  • 24
  • 1
  • Accepted answer, eh? This isn't an answer - just a "hint" on what you should do. Different Linux distributions do -not- diverge all that much. They all use a (sh) shell and have a GNU mount with similar (if not exact) arguments. You do NOT need a script to get a fuse remote as a mount point. If it doesn't work without a script you are doing it wrong. The `mount` command is ENOUGH. Adding a startup script is bad advice when you do not need one. – B. Shea Jan 31 '23 at 17:08
-1

Please notice autofs starts as root. Then, the credentials file .passwd-s3fs, has to be into the root directory, not into a user folder.

user2402192
  • 1