Cannot send emails through ASP.NET application

Question

I have an ASP.NET application running on a dedicated server "Windows Server 2012 R2". The site uses SSL encryption throughout, the certificate is correctly installed on the server and shows as valid when accessed through different browsers.

I now want to send emails through my application, to do this I set up an SMTP server following the instructions in this article. http://www.vsysad.com/2014/09/setup-and-configure-smtp-server-on-windows-server-2012/

After setting up the SMTP server as specified above, I can send emails using powershell, and they are sent without issue. However, when I do the same through my application I get the following error

Exception Type: System.Security.Authentication.AuthenticationException
Exception: The remote certificate is invalid according to the validation procedure.
Stack Trace: 
   at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Exception exception)
   at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
   at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
   at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
   at System.Net.Mail.SmtpConnection.Flush()
   at System.Net.Mail.EHelloCommand.Send(SmtpConnection conn, String domain)
   at System.Net.Mail.SmtpConnection.GetConnection(ServicePoint servicePoint)
   at System.Net.Mail.SmtpClient.Send(MailMessage message)
   at EmailSender.SendMailSingleRecipient(String recipient, String subject, String message)

The code to send the email from my application is very simple as you can see below.

MailMessage mailMessage = new MailMessage();
mailMessage.From = new MailAddress("no-reply@mysite.com");
mailMessage.To.Add("myemail@email.com");
mailMessage.Subject = "subject"
mailMessage.Body = "message"

SmtpClient smtpClient = new SmtpClient("localhost", 25);
smtpClient.Send(mailMessage);

I have seen the same issue reported many times, but no answer which solves the issue for me. Could someone explain the reason behind this error and possible causes/solutions.

score 1 · Answer 1 · answered Nov 21 '15 at 11:13

Check this function.

protected void SendMail()
    {
        var fromAddress = "youremail@gmail.com";// Gmail Address from where you send the mail
        var toAddress = YourEmail.Text.ToString();
        const string fromPassword = "password";//Password of your gmail address
        string email = YourEmail.Text.ToString();
        string body = "First Name: " + YourName.Text + "\n";
        body += "Last Name: " + YourlName.Text + "\n";
        body += "Email: " + YourEmail.Text + "\n";
        body += "mobile no.: " + Yourmobi.Text + "\n";
        body += "Question: \n" + Comments.Text + "\n";
        var smtp = new System.Net.Mail.SmtpClient();
        {
            smtp.Host = "smtp.gmail.com";
            smtp.Port = 587;
            smtp.EnableSsl = true;
            smtp.DeliveryMethod = System.Net.Mail.SmtpDeliveryMethod.Network;
            smtp.Credentials = new NetworkCredential(fromAddress, fromPassword);
            smtp.Timeout = 20000;
        }
        smtp.Send(toAddress, fromAddress, email, body);
        try
        {
            lblMsgSend.Text = "Your Comments after sending the mail";
            lblMsgSend.Visible = true;
            Yourmobi.Text = "";
            YourEmail.Text = "";
            YourName.Text = "";
            YourlName.Text = "";
            Comments.Text = "";
        }
        catch (Exception) { }
    }

score 0 · Answer 2 · edited May 23 '17 at 11:59

0

The problem is, you neet to set the Credentials. Your powershell scritp seems to run in another user context than your asp.net host, so it works, but your asp.net app does not.

Just take a look at: How to set username and password for SmtpClient object in .NET?

edited May 23 '17 at 11:59

Community

1
1

answered Nov 21 '15 at 11:04

BendEg

20,098
17
57
131

The SMTP server is setup with no username and password required, it just has to be from the local machine as described in step 13 from the linked article. Would this mean I just need to specify "DefaultNetworkCredentials" for the client credentials? – Tom smith Nov 21 '15 at 20:33

score 0 · Answer 3 · answered Nov 21 '15 at 11:06

0

this may be the reson SMTP service on the server is not using the same certificate as https.

The diagnostic steps I had read here

answered Nov 21 '15 at 11:06

MMM

3,132
3
20
32

score 0 · Accepted Answer · answered Nov 27 '15 at 16:41

I managed to find a solution to my original question. Instead of sending directly from my application, I set up my SMTP server to use a pickup directory instead.

The application code is very simple now, specifying the delivery method and pickup directory can also be moved into the configuration file.

SmtpClient client = new SmtpClient("localhost", 25);
client.DeliveryMethod = SmtpDeliveryMethod.SpecifiedPickupDirectory;
client.PickupDirectoryLocation = @"C:\inetpub\mailroot\Pickup";
client.Send(mail);

Another advantage with this approach is that the generation of emails from the application can be tested without setting up SMTP on a development machine. By looking in the pickup directory you can determine if the application is working correctly.

Using this approach on my live server, I receive the email almost as soon as I send it from my application so the performance is very good.

Cannot send emails through ASP.NET application

4 Answers4