wvdial, pppd and default route metric

Asked Mar 21 '16 at 08:39

Active Mar 21 '16 at 13:52

Viewed 648 times

I have this in wvdial.conf:

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0
Modem Type = USB Modem
Phone = *99#
New PPD = yes
ISDN = 0
Username = foo
Init1 = ATZ
Password = foo
Modem = /dev/ttyUSB1
Baud = 9600
Stupid Mode = 0
#Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CFUN=1
Init4 = AT+CGDCONT=1,"ip","internet"
Auto Reconnect = on

(PIN disabled) This is working for 4G USB Dongle Huawei E3131 @ T-mobile.pl.

And now I have 2 questions:

1 How to translate this config to /etc/conf.d/net for connect as net.ppp1 (Gentoo) (I would connecting without wvdial)

2 After connecting I get default route with metric 0, How to change metric to say 100? (I'm interested in setting metric for both wvdial & pppd way)

edited Jun 20 '20 at 09:12

Community

asked Mar 21 '16 at 08:39

McKanty

wvdial, pppd and default route metric

1 How to translate this config to /etc/conf.d/net for connect as net.ppp1 (Gentoo) (I would connecting without wvdial)

2 After connecting I get default route with metric 0, How to change metric to say 100? (I'm interested in setting metric for both wvdial & pppd way)

0 Answers0