2

I am trying to enable ethernet communication on an Infineon Aurix Tricore, specifically TC29x. To this end I am using the Aurix SW_framework_tools and the ILLD supplied by Infineon on their Aurix workspace page (if you ask for access).

In the ILLD package and demo, they have a ethernet demo with loopback_mode enabled. This demo works fine on the board. I then wanted to send out a package to another machine to enable ethernet communication. I have tried fiddling around with settings, using wireshark with cross-over-cable, wireshark with switch, against windows and linux pc's. With no packages received

I am therefore unsure if the demo has the pinmap configured correctly, and/or if some settings I have missed should be changed. My question is therefore if anyone has enabled ethernet communication using the infineon tools, and can guide me?

Tools

I have chosen the HighTec toolchain using the debuger UDE, all are from the free tools available on Infineon.

Board

Infineon Aurix Tricore TC299 Starter Kit.

JTIM
  • 2,774
  • 1
  • 34
  • 74
  • I am also facing the same issue. If you have solved it , please help me with the solution . – Jasdeep Singh Arora May 18 '17 at 10:15
  • @JasdeepSinghArora unfortunately not, we are looking at buying an OS from a vendor. If you have any success in your coming work please share. – JTIM May 18 '17 at 14:00

0 Answers0