How Dynamically change URL in a WCF Custom Behavior

Question

Class is defined as follows:

public class BizTalkRESTTransmitHandler : IClientMessageInspector

I'm a method with this signature:

public object BeforeSendRequest(ref Message request, IClientChannel channel)

So I think I need to manipulate the channel object.

The reason is this is being using in BizTalk 2010 SendPort to support JSON. I tried this so far:

if (channel.RemoteAddress.Uri.AbsoluteUri == "http://api-stage2.mypartner.com/rest/events/2/"
    || channel.RemoteAddress.Uri.AbsoluteUri == "http://api.mypartner.com/rest/events/2/")
{
    //TODO - "boxout" will become a variable obtained by parsing the message
    Uri newUri = new Uri(channel.RemoteAddress.Uri.AbsoluteUri + "boxout");
    channel.RemoteAddress.Uri = newUri; 

}

Above gives compile error: "System.ServiceModel.EndpointAddress.Uri" cannot be assigned to - it is ready only" RemoteAddress seems to be read only as well.

I have referenced these questions but they don't use channel object. Assign a URL to Url.AbsoluteUri in ASP.NET, and WCF change endpoint address at runtime But they don't seem to be dealing with channel object.

Update 1: I tried the following:

//try create new channel to change URL 
WebHttpBinding myBinding = new WebHttpBinding();
EndpointAddress myEndpoint = new EndpointAddress(newURL);
ChannelFactory<IClientChannel> myChannelFactory = new ChannelFactory<IClientChannel>(myBinding, myEndpoint); //Change to you WCF interface
IClientChannel myNewChannel = myChannelFactory.CreateChannel();
channel = myNewChannel;  //replace the channel parm passed to us

but it gave this error: System.InvalidOperationException: Attempted to get contract type for IClientChannel, but that type is not a ServiceContract, nor does it inherit a ServiceContract.

What about creating a whole new channel like here? Seems like overkill. http://stackoverflow.com/questions/27782919/wcf-change-address-at-runtime-exception/27783784#27783784 — NealWalters, Sep 08 '16 at 14:12

score 2 · Answer 1 · answered Sep 09 '16 at 13:44

Using the interface IEndpointBehavior, you'll have access to the ApplyClientBehavior method, which exposes the ServiceEndPoint instance. Now you can change the value for the Address by defining a new EndpointAddress instance.

public class MyCustomEndpointBehavior : IEndpointBehavior
{     
    public void AddBindingParameters(ServiceEndpoint serviceEndpoint, System.ServiceModel.Channels.BindingParameterCollection bindingParameters)
    {
    }
    public void ApplyClientBehavior(ServiceEndpoint serviceEndpoint, System.ServiceModel.Dispatcher.ClientRuntime behavior)
    {
        serviceEndpoint.Address = new System.ServiceModel.EndpointAddress("http://mynewaddress.com");
    }
    public void ApplyDispatchBehavior(ServiceEndpoint serviceEndpoint, System.ServiceModel.Dispatcher.EndpointDispatcher endpointDispatcher)
    {
    }
    public void Validate(ServiceEndpoint serviceEndpoint)
    {
    }
}

I see that would probably work for a literal; but I didn't explain in my question-the URL needs a suffix based on the message type. So the message doesn't seem to be available in that message. [I have already built a BizTalk Pipeline that does it, but I would rather to it and the JSON/Conversion one program, rather than in two.] — NealWalters, Sep 12 '16 at 16:12

score 2 · Accepted Answer · edited May 23 '17 at 12:08

IClientMessageInspector is not the right place the manipulate the Channel, you should use IEndpointBehavior instead:

From MSDN

Implements methods that can be used to extend run-time behavior for an endpoint in either a service or client application.

Here is a simple example:

public void ApplyDispatchBehavior(ServiceEndpoint endpoint, EndpointDispatcher endpointDispatcher)
{
    Uri endpointAddress = endpoint.Address.Uri;
    string address = endpointAddress.ToString();

    if (address == "http://api-stage2.mypartner.com/rest/events/2/"
    || address == "http://api.mypartner.com/rest/events/2/")
    {
        //TODO - "boxout" will become a variable obtained by parsing the message
        Uri newUri = new Uri(address + "boxout");
        ServiceHostBase host = endpointDispatcher.ChannelDispatcher.Host;
        ChannelDispatcher newDispatcher = this.CreateChannelDispatcher(host, endpoint, newUri);
        host.ChannelDispatchers.Add(newDispatcher);
    }
}

Here you can read the excelent post of Carlos Figueira about IEndpointBehavior: https://blogs.msdn.microsoft.com/carlosfigueira/2011/04/04/wcf-extensibility-iendpointbehavior/

Another alternative is to implement a simple Routing with WCF, here is link with an example: WCF REST service url routing based on query parameters

Hope it helps.

Bounty awarded... But sadly, as I told the other guy who answered, I need to change the URL based on data in my message. I ended up doing it in the BizTalk Pipeline. — NealWalters, Sep 15 '16 at 15:55

score 0 · Answer 3 · answered Jul 28 '17 at 13:35

I might be a bit too late but hoe it helps a bit.

I recently had a similar objective (also related to biztalk) where I needed to change the url based on some value sent on the message. I tried using the ApplyDispatchBehavior method but it was never called and also, I couldn't see how to access the message from here so I started looking at method BeforeSendRequest (in the Inspector class).

Here is what i came up with:

object IClientMessageInspector.BeforeSendRequest(ref Message request, IClientChannel channel)
    {
        var queryDictionary = HttpUtility.ParseQueryString(request.Headers.To.Query);
        string parameterValue = queryDictionary[this.BehaviourConfiguration.QueryParameter];

        //Only change parameter value if it exists
        if (parameterValue != null)
        {
            MessageBuffer buffer = request.CreateBufferedCopy(Int32.MaxValue);

            request = buffer.CreateMessage();

            //Necessary in order to read the message without having WCF throwing and error saying
            //the messas was already read
            var reqAux = buffer.CreateMessage();

            //For some reason the message comes in binary inside tags <Binary>MESSAGE</Binary>
            using (MemoryStream ms = new MemoryStream(Convert.FromBase64String(reqAux.ToString().Replace("<Binary>", "").Replace("</Binary>", ""))))
            {
                ms.Position = 0;
                string val = ExtractNodeValueByXPath(ms, this.BehaviourConfiguration.FieldXpath);

                queryDictionary.Set(this.BehaviourConfiguration.QueryParameter, DateTime.Now.ToString("yyyyMMddHHmmssfff") + "_" +
                    this.BehaviourConfiguration.Message + (string.IsNullOrWhiteSpace(val) ? string.Empty : "_" + val) + ".xml");

                UriBuilder ub = new UriBuilder(request.Headers.To);
                ub.Query = queryDictionary.ToString();
                request.Headers.To = ub.Uri;
            }
        }

        return null;
    }

So, I discovered that, messing with the request.Headers.To I could change the endpoint.

I had several problems getting the message content and most examples on the internet (showing to use the MessageBuffer.CreateNavigator or Message.GetBody< string > which was always throwing an expcetion i couldn't get around) would not give me the biztalk message but rather the soap message?... not sure but it had a node header, body and inside the body there was some base64 string which was not my biztalk message.

Also, as you can see in Convert.FromBase64String(reqAux.ToString().Replace("<Binary>", "").Replace("</Binary>", "")), I had to do this ugly replaces. I don't don't why this comes in base64, probably some WCF configuration?, but by doing it, I could then look for my value.

NOTE: I haven't fully tested this, but so far it as worked for my examples.

By the way, any idea on what can i switch my MemoryStream with so it becomes a more streaming solution?

How Dynamically change URL in a WCF Custom Behavior

3 Answers3

Linked