I've installed MRTG, added some options and customizing of mrtg.cfg. Interface speed is 1 Gb/s. I wanted to show the graph and data in bits, not bytes. I ended up with graphs as example show 8Mb/s rather than 80 Mb/s. Where is the mistake in my mrtg.cfg?
Target[10.0.1.1_7]: 7:public@10.0.1.1:
YLegend[10.0.1.1_7]: Bits per Second
Colours[10.0.1.1_7]: GREEN#00eb0c,BLUE#1000ff,DARK GREEN#006600,VIOLET#ff00ff
Background[10.0.1.1_7]: #a0a0a0a
Kilo[10.0.1.1_7]: 1024
SetEnv[10.0.1.1_7]: MRTG_INT_IP="a.b.c.d" MRTG_INT_DESCR="eth1"
MaxBytes[10.0.1.1_7]: 125000000
Title[10.0.1.1_7]: WAN -- Oslo
PageTop[10.0.1.1_7]: <h1>WAN -- OSL</h1>
<div id="sysdetails">
<table>
<tr>
<td>System:</td>
<td>Cisco RV320 OSL </td>
</tr>
<tr>
<td>Maintainer:</td>
<td></td>
</tr>
<tr>
<td>Description:</td>
<td>eth1 </td>
</tr>
<tr>
<td>ifType:</td>
<td>ethernetCsmacd (6)</td>
</tr>
<tr>
<td>ifName:</td>
<td>eth1</td>
</tr>
<tr>
<td>Max Speed:</td>
<td>1000 Mbit/s</td>
</tr>
<tr>
<td>Ip:</td>
<td>a.b.c.d (No DNS name)</td>
</tr>
</table>
</div>
I also added following options:
options[_]: growright,bits,transparent,nobanner,nolegend