3

I am setting up my raspberry pi as a VPN client using IPsec/L2TP.I am using the following guide Configure Linux VPN clients using the command line

  1. There are several problems which I am encountring After setting up all the settings, when I try to start the IPsec connection using ipsec up myvpn. I get the following error

    /usr/local/sbin/ipsec: unknown IPsec command "up" ("ipsec --help" for list)

  2. After setting up and rebooting my raspberry pi, when I run ipsec verify, I get the table status table of ipsec verify in which my pluto is not running(error 1) and there is an error of ikev1.

My motivation is to setup VPN client on my raspberry pi using IPsec/L2TP so that I can access my remote VPN client. Also I am setting up my IPsec/L2TP using strongSwan and xl2tpd but using Ipsec verify, on path ipsec verison is Libreswan 3.27 (netkey) on 4.14.98-v7+. i tried to change it but didn't succeeded. Any recommendations regaridng above mentioned queries would be great and I shall be thanful. Regards Saqib

Saqib Shakeel
  • 615
  • 2
  • 8
  • 17

0 Answers0