We can use a cmake config file to import targets. For example given machinary including foobarConfig.cmake.in
set(FOOBAR_VERSION @VERSION@)
@PACKAGE_INIT@
set_and_check(FOOBAR_INCLUDE_DIR "@PACKAGE_INCLUDE_INSTALL_DIR@")
set_and_check(FOOBAR_LIBRARY_DIR "@PACKAGE_LIBRARY_INSTALL_DIR@")
set_and_check(FOOBAR_LIBRARY "@PACKAGE_LIBRARY_INSTALL_DIR@/libfoobar.so")
set_and_check(FOOBAR_STATIC_LIBRARY @PACKAGE_LIBRARY_INSTALL_DIR@/libfoobar.a")
include("${CMAKE_CURRENT_LIST_DIR}/FoobarLibTargets.cmake")
message(STATUS "foobar version: ${FOOBAR_VERSION}")
message(STATUS "foobar include location: ${FOOBAR_INCLUDE_DIR}")
message(STATUS "foobar library location: ${FOOBAR_LIBRARY_DIR}")
for an exported target foobar
We can do:
find_package(foobar)
add_executable(usesfoo
usesfoo.cpp)
target_link_libraries(usesfoo
${FOOBAR_LIBRARY})
target_include_directories(usesfoo PUBLIC
${FOOBAR_INCLUDE_DIR})
and it normally just works. However, I have a strage case where variables set in the Config.cmake are not available after find_package. For example given:
find_package(foobar REQUIRED)
if (foobar_FOUND)
message(STATUS "found foobar")
endif()
message(STATUS "foobar include location2: ${FOOBAR_INCLUDE_DIR}")
message(STATUS "foobar library location2: ${FOOBAR_LIBRARY_DIR}")
The output is:
foobar include location: /test-import/opt/foobar/include
foobar library location: /test-import/opt/foobar/lib
found foobar
foobar include location2:
foobar library location2:
What could be going on here?
How can I:
- Find this problem?
- Avoid similar problems in the future?
- Create these files in a safe and canonical way?
I got very confused trying to debug this and started to question how Config packages are supposed to work. Should I be using properties of imported targets instead of variables? What scope does find_package run in? I thought it was like an include() rather than an add_subdirectory() - which introduces its own scope. How can these variables become unset? What is find_package doing under the hood?
See also correctly set the location of imported cmake targets for an installed package. That question contains code to reproduce that problem which is similar to the code for this problem.
Complete set of files to reproduce the problem:
CMakeLists.txt:
cmake_minimum_required(VERSION 3.7)
set(VERSION 1.3.3)
project(FoobarLib VERSION "${VERSION}" LANGUAGES CXX)
SET(CMAKE_INSTALL_PREFIX "/opt/foo")
set(INSTALL_LIB_DIR lib)
add_library(foobar SHARED
foobar.cpp
)
# Create the distribution package(s)
set(CPACK_PACKAGE_VERSION ${VERSION})
set(CPACK_INCLUDE_TOPLEVEL_DIRECTORY 0)
set(CPACK_PACKAGING_INSTALL_PREFIX ${CMAKE_INSTALL_PREFIX})
set(CPACK_PACKAGE_NAME "foobar")
set(CPACK_PACKAGE_FILE_NAME "${CPACK_PACKAGE_NAME}-${CPACK_PACKAGE_VERSION}")
set(LIBRARY_INSTALL_DIR lib)
set(INCLUDE_INSTALL_DIR include)
INSTALL(TARGETS foobar
EXPORT FoobarLibTargets
LIBRARY DESTINATION ${LIBRARY_INSTALL_DIR}
ARCHIVE DESTINATION ${LIBRARY_INSTALL_DIR}
INCLUDES DESTINATION ${INCLUDE_INSTALL_DIR})
include(CMakePackageConfigHelpers)
set(ConfigFileInstallDir lib/cmake/FoobarLib)
set(INCLUDE_INSTALL_DIR include CACHE PATH "install path for include files")
set(LIBRARY_INSTALL_DIR lib CACHE PATH "install path for libraries")
configure_package_config_file(FoobarLibConfig.cmake.in
"${CMAKE_CURRENT_BINARY_DIR}/FoobarLibConfig.cmake"
INSTALL_DESTINATION "${ConfigFileInstallDir}"
PATH_VARS INCLUDE_INSTALL_DIR LIBRARY_INSTALL_DIR
)
write_basic_package_version_file(
"${CMAKE_CURRENT_BINARY_DIR}/FoobarLibConfigVersion.cmake"
VERSION "${VERSION}"
COMPATIBILITY SameMajorVersion)
EXPORT(EXPORT FoobarLibTargets
FILE FoobarLibTargets.cmake)
INSTALL(FILES
"${CMAKE_CURRENT_BINARY_DIR}/FoobarLibConfig.cmake"
"${CMAKE_CURRENT_BINARY_DIR}/FoobarLibConfigVersion.cmake"
"${CMAKE_CURRENT_BINARY_DIR}/FoobarLibTargets.cmake"
DESTINATION "${ConfigFileInstallDir}")
include(CPack)
FoobarLibConfig.cmake.in:
set(FoobarLib_VERSION @VERSION@)
@PACKAGE_INIT@
INCLUDE("${CMAKE_CURRENT_LIST_DIR}/FoobarLibTargets.cmake")
SET_AND_CHECK(FoobarLib_LIB_DIR "@PACKAGE_LIBRARY_INSTALL_DIR@")
message(STATUS "Foobar library version: ${FoobarLib_VERSION}")
message(STATUS "Foobar library location: ${FoobarLib_LIB_DIR}")
# workaround incorrect setting of location for import targets when package is installed
# see https://stackoverflow.com/q/56135785/1569204
#set_target_properties(foobar PROPERTIES
# IMPORTED_LOCATION_NOCONFIG "@PACKAGE_LIBRARY_INSTALL_DIR@/libfoobar.so"
# IMPORTED_LOCATION_RELEASE "@PACKAGE_LIBRARY_INSTALL_DIR@/libfoobar.so"
# IMPORTED_LOCATION_DEBUG "@PACKAGE_LIBRARY_INSTALL_DIR@/libfoobar.so")
check_required_components(FoobarLib)
run.sh:
#!/bin/sh
SRC=`pwd`
mkdir -p ./target/debug && \
cd ./target/debug &&
cmake -DCMAKE_BUILD_TYPE=Debug ../../ &&
make &&
cpack -G TGZ
cd ../..
rm -rf foo
mkdir foo
TGZ=`pwd`/target/debug/foobar-1.3.3.tar.gz
cd foo
tar -xvzf $TGZ
cat - >CMakeLists.txt <<EOF
cmake_minimum_required(VERSION 3.7)
project(useFoo VERSION 1.2.3)
find_package(FoobarLib ${MIN_FOOBARLIB_VERSION}
HINTS "${WSDIR}/opt/foo"
PATHS /opt/foo
REQUIRED)
message(STATUS "Foobar library version: ${FOOBARLIB_VERSION}")
message(STATUS "Foobar library location: ${FOOBARLIB_LIB_DIR}")
message(STATUS "FoobarLib_FOUND=${FoobarLib_FOUND}")
message(STATUS "FoobarLib_PATH=${FOOBARLIB_PATH}")
message(STATUS "FoobarLib_DIR=${FoobarLib_DIR}")
message(STATUS "FOOBARLIB_FOUND=${FoobarLib_FOUND}")
message(STATUS "FOOBARLIB_PATH=${FOOBARLIB_PATH}")
message(STATUS "FOOBARLIB_DIR=${FoobarLib_DIR}")
file(GENERATE OUTPUT foobar-loc CONTENT "<TARGET_FILE:foobar>=$<TARGET_FILE:foobar>\n")
EOF
export CMAKE_PREFIX_PATH=`pwd`/opt/foo/lib/cmake:`pwd`/opt/foo/lib/cmake/
cmake . && make VERBOSE=1
echo pwd=`pwd`
# critical - check the location of the target is relative to the installation
grep $WSDIR/opt/foo/lib/libfoobar.so foobar-loc
if [ $? -ne 0 ]; then
echo "FAIL: location of imported target 'foobar' is incorect" >&2
cat foobar-loc >&2
exit 1
fi
Here is the generated Config.cmake as requested by @havogt I don't think it helps as it is the standard generated code:
# CMake configuration file for the FoobarLib package
# Use with the find_package command in config-mode to find information about
# the FoobarLib package.
#
set(FoobarLib_VERSION 1.3.3)
####### Expanded from @PACKAGE_INIT@ by configure_package_config_file() #######
####### Any changes to this file will be overwritten by the next CMake run ####
####### The input file was FoobarLibConfig.cmake.in ########
get_filename_component(PACKAGE_PREFIX_DIR "${CMAKE_CURRENT_LIST_DIR}/../../../" ABSOLUTE)
macro(set_and_check _var _file)
set(${_var} "${_file}")
if(NOT EXISTS "${_file}")
message(FATAL_ERROR "File or directory ${_file} referenced by variable ${_var} does not exist !")
endif()
endmacro()
macro(check_required_components _NAME)
foreach(comp ${${_NAME}_FIND_COMPONENTS})
if(NOT ${_NAME}_${comp}_FOUND)
if(${_NAME}_FIND_REQUIRED_${comp})
set(${_NAME}_FOUND FALSE)
endif()
endif()
endforeach()
endmacro()
####################################################################################
INCLUDE("${CMAKE_CURRENT_LIST_DIR}/FoobarLibTargets.cmake")
SET_AND_CHECK(FoobarLib_LIB_DIR "${PACKAGE_PREFIX_DIR}/lib")
message(STATUS "Foobar library version: ${FoobarLib_VERSION}")
message(STATUS "Foobar library location: ${FoobarLib_LIB_DIR}")
# workaround incorrect setting of location for import targets when package is installed
# see https://stackoverflow.com/q/56135785/1569204
#set_target_properties(foobar PROPERTIES
# IMPORTED_LOCATION_NOCONFIG "${PACKAGE_PREFIX_DIR}/lib/libfoobar.so"
# IMPORTED_LOCATION_RELEASE "${PACKAGE_PREFIX_DIR}/lib/libfoobar.so"
# IMPORTED_LOCATION_DEBUG "${PACKAGE_PREFIX_DIR}/lib/libfoobar.so")
check_required_components(FoobarLib)
'package'_FOUND is set by the implementation of find_package() not by the Config.cmake that it loads. Adding check_required_components() is good practice for other reasons (picking up that someone thinks the package is componentised when it isn't) but is not relevant to this issue.
