I'm not totally sure I understand your question.
It sounds like for 500 input points you want to know, for 1000 line segments, for each point, which segment is closest.
If that's what you're asking then put all the points in a floating point textures (another word for a texture is a 2D array). Draw a -1 to +1 quad that's the size of the number of results (500 results so 50x10 or 25x20 etc..) Pass in the resolution of the textures. Use gl_FragCoord to calculate an index to get the input, A, and loop over all the other lines. Read the results via readPixels by encoding the index of the closest pair as a color.
precision highp float;
uniform sampler2D aValues;
uniform vec2 aDimensions; // the size of the aValues texture in pixels (texels)
uniform sampler2D bValues;
uniform vec2 bDimensions; // the size of the bValues texture in pixels (texels)
uniform sampler2D cValues;
uniform vec2 cDimensions; // the size of the cValues texture in pixels (texels)
uniform vec2 outputDimensions; // the size of the thing we're drawing to (canvas)
// this code, given a sampler2D, the size of the texture, and an index
// computes a UV coordinate to pull one RGBA value out of a texture
// as though the texture was a 1D array.
vec3 getPoint(in sampler2D tex, in vec2 dimensions, in float index) {
vec2 uv = (vec2(
floor(mod(index, dimensions.x)),
floor(index / dimensions.x)) + 0.5) / dimensions;
return texture2D(tex, uv).xyz;
}
// from https://stackoverflow.com/a/6853926/128511
float distanceFromPointToLine(in vec3 a, in vec3 b, in vec3 c) {
vec3 ba = a - b;
vec3 bc = c - b;
float d = dot(ba, bc);
float len = length(bc);
float param = 0.0;
if (len != 0.0) {
param = clamp(d / (len * len), 0.0, 1.0);
}
vec3 r = b + bc * param;
return distance(a, r);
}
void main() {
// gl_FragCoord is the coordinate of the pixel that is being set by the fragment shader.
// It is the center of the pixel so the bottom left corner pixel will be (0.5, 0.5).
// the pixel to the left of that is (1.5, 0.5), The pixel above that is (0.5, 1.5), etc...
// so we can compute back into a linear index
float ndx = floor(gl_FragCoord.y) * outputDimensions.x + floor(gl_FragCoord.x);
// find the closest points
float minDist = 10000000.0;
float minIndex = -1.0;
vec3 a = getPoint(aValues, aDimensions, ndx);
for (int i = 0; i < ${bPoints.length / 4}; ++i) {
vec3 b = getPoint(bValues, bDimensions, float(i));
vec3 c = getPoint(cValues, cDimensions, float(i));
float dist = distanceFromPointToLine(a, b, c);
if (dist < minDist) {
minDist = dist;
minIndex = float(i);
}
}
// convert to 8bit color. The canvas defaults to RGBA 8bits per channel
// so take our integer index (minIndex) and convert to float values that
// will end up as the same 32bit index when read via readPixels as
// 32bit values.
gl_FragColor = vec4(
mod(minIndex, 256.0),
mod(floor(minIndex / 256.0), 256.0),
mod(floor(minIndex / (256.0 * 256.0)), 256.0) ,
floor(minIndex / (256.0 * 256.0 * 256.0))) / 255.0;
}
I'm only going to guess though that in general this is better solved with some spatial structure that somehow makes it so you don't have to check every line with every point but something like the code above should work and be very parallel. Each result will be computed by another GPU core.
const v3 = twgl.v3;
// note: I'm using twgl to make the code smaller.
// This is not lesson in WebGL. You should already know what it means
// to setup buffers and attributes and set uniforms and create textures.
// What's important is the technique, not the minutia of WebGL. If you
// don't know how to do those things you need a much bigger tutorial
// on WebGL like https://webglfundamentals.org
function main() {
const gl = document.createElement('canvas').getContext('webgl');
const ext = gl.getExtension('OES_texture_float');
if (!ext) {
alert('need OES_texture_float');
return;
}
const r = max => Math.random() * max;
const hsl = (h, s, l) => `hsl(${h * 360},${s * 100 | 0}%,${l * 100 | 0}%)`;
function createPoints(numPoints) {
const points = [];
for (let i = 0; i < numPoints; ++i) {
points.push(r(300), r(150), 0, 0); // RGBA
}
return points;
}
function distanceFromPointToLineSquared(a, b, c) {
const ba = v3.subtract(a, b);
const bc = v3.subtract(c, b);
const dot = v3.dot(ba, bc);
const lenSq = v3.lengthSq(bc);
let param = 0;
if (lenSq !== 0) {
param = Math.min(1, Math.max(0, dot / lenSq));
}
const r = v3.add(b, v3.mulScalar(bc, param));
return v3.distanceSq(a, r);
}
const aPoints = createPoints(6);
const bPoints = createPoints(15);
const cPoints = createPoints(15);
// do it in JS to check
{
// compute closest lines to points
const closest = [];
for (let i = 0; i < aPoints.length; i += 4) {
const a = aPoints.slice(i, i + 3);
let minDistSq = Number.MAX_VALUE;
let minIndex = -1;
for (let j = 0; j < bPoints.length; j += 4) {
const b = bPoints.slice(j, j + 3);
const c = cPoints.slice(j, j + 3);
const distSq = distanceFromPointToLineSquared(a, b, c);
if (distSq < minDistSq) {
minDistSq = distSq;
minIndex = j / 4;
}
}
closest.push(minIndex);
}
drawResults(document.querySelector('#js'), closest);
}
const vs = `
attribute vec4 position;
void main() {
gl_Position = position;
}
`;
const fs = `
precision highp float;
uniform sampler2D aValues;
uniform vec2 aDimensions; // the size of the aValues texture in pixels (texels)
uniform sampler2D bValues;
uniform vec2 bDimensions; // the size of the bValues texture in pixels (texels)
uniform sampler2D cValues;
uniform vec2 cDimensions; // the size of the cValues texture in pixels (texels)
uniform vec2 outputDimensions; // the size of the thing we're drawing to (canvas)
// this code, given a sampler2D, the size of the texture, and an index
// computes a UV coordinate to pull one RGBA value out of a texture
// as though the texture was a 1D array.
vec3 getPoint(in sampler2D tex, in vec2 dimensions, in float index) {
vec2 uv = (vec2(
floor(mod(index, dimensions.x)),
floor(index / dimensions.x)) + 0.5) / dimensions;
return texture2D(tex, uv).xyz;
}
// from https://stackoverflow.com/a/6853926/128511
float distanceFromPointToLine(in vec3 a, in vec3 b, in vec3 c) {
vec3 ba = a - b;
vec3 bc = c - b;
float d = dot(ba, bc);
float len = length(bc);
float param = 0.0;
if (len != 0.0) {
param = clamp(d / (len * len), 0.0, 1.0);
}
vec3 r = b + bc * param;
return distance(a, r);
}
void main() {
// gl_FragCoord is the coordinate of the pixel that is being set by the fragment shader.
// It is the center of the pixel so the bottom left corner pixel will be (0.5, 0.5).
// the pixel to the left of that is (1.5, 0.5), The pixel above that is (0.5, 1.5), etc...
// so we can compute back into a linear index
float ndx = floor(gl_FragCoord.y) * outputDimensions.x + floor(gl_FragCoord.x);
// find the closest points
float minDist = 10000000.0;
float minIndex = -1.0;
vec3 a = getPoint(aValues, aDimensions, ndx);
for (int i = 0; i < ${bPoints.length / 4}; ++i) {
vec3 b = getPoint(bValues, bDimensions, float(i));
vec3 c = getPoint(cValues, cDimensions, float(i));
float dist = distanceFromPointToLine(a, b, c);
if (dist < minDist) {
minDist = dist;
minIndex = float(i);
}
}
// convert to 8bit color. The canvas defaults to RGBA 8bits per channel
// so take our integer index (minIndex) and convert to float values that
// will end up as the same 32bit index when read via readPixels as
// 32bit values.
gl_FragColor = vec4(
mod(minIndex, 256.0),
mod(floor(minIndex / 256.0), 256.0),
mod(floor(minIndex / (256.0 * 256.0)), 256.0) ,
floor(minIndex / (256.0 * 256.0 * 256.0))) / 255.0;
}
`;
// compile shader, link program, lookup locations
const programInfo = twgl.createProgramInfo(gl, [vs, fs]);
// calls gl.createBuffer, gl.bindBuffer, gl.bufferData for a -1 to +1 quad
const bufferInfo = twgl.primitives.createXYQuadBufferInfo(gl);
// make an RGBA float texture for each set of points
// calls gl.createTexture, gl.bindTexture, gl.texImage2D, gl.texParameteri
const aTex = twgl.createTexture(gl, {
src: aPoints,
width: aPoints.length / 4,
type: gl.FLOAT,
minMag: gl.NEAREST,
});
const bTex = twgl.createTexture(gl, {
src: bPoints,
width: bPoints.length / 4,
type: gl.FLOAT,
minMag: gl.NEAREST,
});
const cTex = twgl.createTexture(gl, {
src: cPoints,
width: cPoints.length / 4,
type: gl.FLOAT,
minMag: gl.NEAREST,
});
const numOutputs = aPoints.length / 4;
gl.canvas.width = numOutputs;
gl.canvas.height = 1;
gl.viewport(0, 0, numOutputs, 1);
gl.useProgram(programInfo.program);
// calls gl.bindBuffer, gl.enableVertexAttribArray, gl.vertexAttribPointer
twgl.setBuffersAndAttributes(gl, programInfo, bufferInfo);
// calls gl.activeTexture, gl.bindTexture, gl.uniform
twgl.setUniforms(programInfo, {
aValues: aTex,
aDimensions: [aPoints.length / 4, 1],
bValues: cTex,
bDimensions: [bPoints.length / 4, 1],
cValues: bTex,
cDimensions: [cPoints.length / 4, 1],
outputDimensions: [aPoints.length / 4, 1],
});
// draw the quad
gl.drawElements(gl.TRIANGLES, 6, gl.UNSIGNED_SHORT, 0);
// get result
const pixels = new Uint8Array(numOutputs * 4);
const results = new Uint32Array(pixels.buffer);
gl.readPixels(0, 0, numOutputs, 1, gl.RGBA, gl.UNSIGNED_BYTE, pixels);
drawResults(document.querySelector('#glsl'), results);
function drawResults(canvas, closest) {
const ctx = canvas.getContext('2d');
// draw the lines
ctx.beginPath();
for (let j = 0; j < bPoints.length; j += 4) {
const b = bPoints.slice(j, j + 2);
const c = cPoints.slice(j, j + 2);
ctx.moveTo(...b);
ctx.lineTo(...c);
}
ctx.strokeStyle = '#888';
ctx.stroke();
// draw the points and closest lines
for (let i = 0; i < aPoints.length; i += 4) {
const a = aPoints.slice(i, i + 2);
const ndx = closest[i / 4] * 4;
const b = bPoints.slice(ndx, ndx + 2);
const c = cPoints.slice(ndx, ndx + 2);
const color = hsl(i / aPoints.length, 1, 0.4);
ctx.fillStyle = color;
ctx.strokeStyle = color;
ctx.fillRect(a[0] - 2, a[1] - 2, 5, 5);
ctx.beginPath();
ctx.moveTo(...b);
ctx.lineTo(...c);
ctx.stroke();
}
}
}
main();
canvas { border: 1px solid black; margin: 5px; }
<script src="https://twgljs.org/dist/4.x/twgl-full.min.js"></script>
<div>glsl</div>
<canvas id="glsl"></canvas>
<div>js</div>
<canvas id="js"></canvas>
If you use WebGL2 then you can use texelFetch so getPoint becomes
vec3 getPoint(in sampler2D tex, in int index) {
ivec2 size = textureSize(tex, 0);
ivec2 uv = ivec2(index % size.x, index / size.x);
return texelFetch(tex, uv, 0).xyz;
}
and you don't need to pass in the size of the input textures, only the output size. Also you could make your output R32U and output unsigned integer indices so no need to encode the result.
note: The code assumes you are doing less then 2048 values for each a, b and c so much of the code assumes 1 dimensional textures. If you need more than 2048 you'll need to adjust the code to make rectangular textures of a size that fits your data for example if you had 9000 values then a 9x1000 texture would work. If you have 8999 values then you still need a 9x1000 texture just padded to make a rectangle since textures are 2D arrays.
Also note that calling readPixels is considered slow. For example, if you just wanted to draw the results as above, instead of rendering to the canvas and reading the values out via readPixels you could render the result to a texture, then pass the texture into another shader.
addendum
This is probably the wrong place for this but as a terse explanation of GLSL for stuff like this you can think of GLSL as a fancy version of Array.prototype.map. When you use map you don't choose what is being written to directly. It happens indirectly.
const a = [1, 2, 3, 4, 5];
const b = a.map((v, index) => { return v * 2 + index; });
The { return v * 2 + index} part is analogous to a shader. In JavaScript the function inside map returns in value. in GLSL ES 1.0 the shader sets gl_FragColor as the output. In the Javascript index is the index of the array being written to (and happens to be the index of the input array as well). In GLSL gl_FragCoord serves the same role.
Otherwise, the output of the vertex shader determines which pixels (which array elements of a 2D array) will get written to so that makes it a more selective version of map. In the code above we're drawing a -1 to +1 quad effectively saying "map over all pixels".
In fact here's a version of the above code, no GLSL, just JavaScript, but the JavaScript re-structured to look more like GLSL.
const v3 = twgl.v3;
function main() {
const r = max => Math.random() * max;
const hsl = (h, s, l) => `hsl(${h * 360},${s * 100 | 0}%,${l * 100 | 0}%)`;
function createPoints(numPoints) {
const points = [];
for (let i = 0; i < numPoints; ++i) {
points.push(r(300), r(150), 0, 0); // RGBA
}
return points;
}
function distanceFromPointToLineSquared(a, b, c) {
const ba = v3.subtract(a, b);
const bc = v3.subtract(c, b);
const dot = v3.dot(ba, bc);
const lenSq = v3.lengthSq(bc);
let param = 0;
if (lenSq !== 0) {
param = Math.min(1, Math.max(0, dot / lenSq));
}
const r = v3.add(b, v3.mulScalar(bc, param));
return v3.distanceSq(a, r);
}
const aPoints = createPoints(6);
const bPoints = createPoints(15);
const cPoints = createPoints(15);
const gl_FragCoord = {};
let gl_FragColor;
const aValues = aPoints;
const aDimensions = {}; // N/A
const bValues = bPoints;
const bDimensions = {}; // N/A
const cValues = cPoints;
const cDimensions = {}; // N/A
const outputDimensions = {x: aPoints.length / 4, y: 1 };
function getPoint(sampler, dimension, ndx) {
return sampler.slice(ndx * 4, ndx * 4 + 3);
}
function javaScriptFragmentShader() {
// gl_FragCoord is the coordinate of the pixel that is being set by the fragment shader.
// It is the center of the pixel so the bottom left corner pixel will be (0.5, 0.5).
// the pixel to the left of that is (1.5, 0.5), The pixel above that is (0.5, 1.5), etc...
// so we can compute back into a linear index
const ndx = Math.floor(gl_FragCoord.y) * outputDimensions.x + Math.floor(gl_FragCoord.x);
// find the closest points
let minDist = 10000000.0;
let minIndex = -1.0;
const a = getPoint(aValues, aDimensions, ndx);
for (let i = 0; i < bPoints.length / 4; ++i) {
const b = getPoint(bValues, bDimensions, i);
const c = getPoint(cValues, cDimensions, i);
const dist = distanceFromPointToLineSquared(a, b, c);
if (dist < minDist) {
minDist = dist;
minIndex = i;
}
}
// convert to 8bit color. The canvas defaults to RGBA 8bits per channel
// so take our integer index (minIndex) and convert to float values that
// will end up as the same 32bit index when read via readPixels as
// 32bit values.
gl_FragColor = [
minIndex % 256.0,
Math.floor(minIndex / 256.0) % 256.0,
Math.floor(minIndex / (256.0 * 256.0)) % 256.0,
Math.floor(minIndex / (256.0 * 256.0 * 256.0)),
].map(v => v / 255.0);
}
// do it in JS to check
{
// compute closest lines to points
const closest = [];
const width = aPoints.length / 4;
const height = 1;
// WebGL drawing each pixel
for (let y = 0; y < height; ++y) {
for (let x = 0; x < width; ++x) {
gl_FragCoord.x = x + 0.5; // because pixels represent a rectangle one unit wide in pixel space
gl_FragCoord.y = y + 0.5; // so the center of each pixel in the middle of that rectangle
javaScriptFragmentShader();
const index = gl_FragColor[0] * 255 +
gl_FragColor[1] * 255 * 256 +
gl_FragColor[2] * 255 * 256 * 256 +
gl_FragColor[3] * 255 * 256 * 256 * 256;
closest.push(index);
}
}
drawResults(document.querySelector('#js'), closest);
}
function drawResults(canvas, closest) {
const ctx = canvas.getContext('2d');
// draw the lines
ctx.beginPath();
for (let j = 0; j < bPoints.length; j += 4) {
const b = bPoints.slice(j, j + 2);
const c = cPoints.slice(j, j + 2);
ctx.moveTo(...b);
ctx.lineTo(...c);
}
ctx.strokeStyle = '#888';
ctx.stroke();
// draw the points and closest lines
for (let i = 0; i < aPoints.length; i += 4) {
const a = aPoints.slice(i, i + 2);
const ndx = closest[i / 4] * 4;
const b = bPoints.slice(ndx, ndx + 2);
const c = cPoints.slice(ndx, ndx + 2);
const color = hsl(i / aPoints.length, 1, 0.4);
ctx.fillStyle = color;
ctx.strokeStyle = color;
ctx.fillRect(a[0] - 2, a[1] - 2, 5, 5);
ctx.beginPath();
ctx.moveTo(...b);
ctx.lineTo(...c);
ctx.stroke();
}
}
}
main();
canvas { border: 1px solid black; margin: 5px; }
<script src="https://twgljs.org/dist/4.x/twgl-full.min.js"></script>
<canvas id="js"></canvas>
