I found this project from the diy-life and improved the python code to include icons and more accurate information. I did notice that it uses quite alot of cpu (like other idle services use way less compared to this python script).
What cadvisory says trough grafana: Picture of the test container using alot of cpu
Anything else is just fine, i assume it's because we update the script every second, but is this the real and only reason this script uses so much cpu power on a pi?
Thank you in advance! If your curious about the PR you can find it here: https://github.com/mklements/OLED_Stats/pull/5
#!/usr/bin/env python3
# Created by: Michael Klements & Wesley de Vree (Macley(kun))
# For Raspberry Pi Desktop Case with OLED Stats Display
# Base on Adafruit CircuitPython & SSD1306 Libraries
# Installation & Setup Instructions - https://www.the-diy-life.com/add-an-oled-stats-display-to-raspberry-pi-os-bullseye/
import time
import board
import busio
import digitalio
import adafruit_ssd1306
import subprocess
import datetime
from PIL import Image, ImageDraw, ImageFont
def time_in_range(start, end, current):
# Returns whether current is in the range [start, end]
return start <= current <= end
# Display Parameters
width = 128
height = 64
# Font size
font_sz = 16
# Wait with refresh after showing all stats (takes a second)
sleep = 0
# When the display should be on e.g. 8:30 (8, 30, 0) up to 23:00
start = datetime.time(0, 0, 0)
end = datetime.time(0, 0, 0)
current = datetime.datetime.now().time()
# Methode to control the display with oled func
oled = adafruit_ssd1306.SSD1306_I2C(width, height, board.I2C(), addr=0x3C, reset=digitalio.DigitalInOut(board.D4))
# Clear display.
oled.fill(0)
oled.show()
# Create a blank image for drawing in 1-bit color
image = Image.new('1', (oled.width, oled.height))
# Get drawing object to draw on image
draw = ImageDraw.Draw(image)
# Import custom fonts
font = ImageFont.truetype('PixelOperator.ttf', font_sz)
icon_font= ImageFont.truetype('lineawesome-webfont.ttf', font_sz)
while True:
while (time_in_range(start, end, current)):
current = datetime.datetime.now().time()
draw.rectangle((0, 0, oled.width, oled.height), fill=0) # Draw a black filled box to clear the image.
cmd = "ip addr | awk '/inet / { print $2 }' | sed -n '2{p;q}' | cut -d '/' -f1" # Command that's executed in bash
IP = subprocess.check_output(cmd, shell = True ) # Register ouput from cmd in var
cmd = "vmstat 1 2|tail -1|awk '{print 100-$15}' | tr -d '\n'" # Takes a second to fetch for accurate cpu usage in %
CPU = subprocess.check_output(cmd, shell = True )
cmd = "free -m | awk 'NR==2{printf $3}'| awk '{printf $1/1000}'"
Memuse = subprocess.check_output(cmd, shell = True )
cmd = "cat /proc/meminfo | head -n 1 | awk -v CONVFMT='%.0f' '{printf $2/1000000}'"
MemTotal = subprocess.check_output(cmd, shell = True )
cmd = "free -m | awk -v CONVFMT='%.1f' 'NR==2{printf $3*100/$2}'"
Memuseper = subprocess.check_output(cmd, shell = True )
cmd = "df -h | awk '$NF==\"/\"{printf \"%s\", $5}'"
Disk = subprocess.check_output(cmd, shell = True )
#cmd = "uptime=$(</proc/uptime) ; uptime=${uptime%%.*} ; days=$(( uptime/60/60/24 )); echo $days days"
cmd = "uptime | awk '{print $3,$4}' | cut -f1 -d','"
uptime = subprocess.check_output(cmd, shell = True )
cmd = "cat /sys/class/thermal/thermal_zone*/temp | awk -v CONVFMT='%.1f' '{printf $1/1000}'"
temp = subprocess.check_output(cmd, shell = True )
# We draw the icons seprately and offset by a fixed amount later
# Icon wifi, chr num comes from unicode  to decimal 61931 (Use: https://www.binaryhexconverter.com/hex-to-decimal-converter)
draw.text((1, 0), chr(61931), font=icon_font, fill=255) # Offset the icon on the x-as a little and devide the y-as in steps of 16
# Icon cpu
draw.text((1, 16), chr(62171), font=icon_font, fill=255)
# Icon temp right
draw.text((111, 16), chr(62153), font=icon_font, fill=255) # Offset the icon from the left to the farthest right
# Icon memory
draw.text((1, 32), chr(62776), font=icon_font, fill=255)
# Icon disk
draw.text((1, 48), chr(63426), font=icon_font, fill=255)
# Icon temp right
draw.text((111, 48), chr(62034), font=icon_font, fill=255)
# Pi Stats Display, printed from left to right each line
draw.text((22, 0), str(IP,'utf-8'), font=font, fill=255) # x y followed by the content to be printed on the display followed by how it should be printed
draw.text((22, 16), str(CPU,'utf-8') + "%", font=font, fill=255)
draw.text((107, 16), str(temp,'utf-8') + "°C", font=font, fill=255, anchor="ra") # anchor basically refers to printing right to left: https://pillow.readthedocs.io/en/stable/handbook/text-anchors.html#specifying-an-anchor
draw.text((22, 32), str(Memuseper,'utf-8') + "%", font=font, fill=255)
draw.text((125, 32), str(Memuse,'utf-8') + "/" + str(MemTotal,'utf-8') + "G", font=font, fill=255, anchor="ra")
draw.text((22, 48), str(Disk,'utf-8'), font=font, fill=255)
draw.text((107, 48), str(uptime,'utf-8'), font=font, fill=255, anchor="ra")
# Display image
oled.image(image)
oled.show()
else:
oled.fill(0)
oled.show()
sleep(60)
current = datetime.datetime.now().time()
time.sleep(sleep)
