hello, good day, I am making an example with a 5500 chip in esp32 with the socketioclient library, but when I want to send the json to my server, they are only left on the waiting list and I don't know what is happening to me, before all this an error message about invalid mbox appeared and I added the following line of code esp_netif_init(); and it was fixed, but once entering the loop the following happens:
serial monitor:
Starting WebServer on ESP32 with W5x00 using Ethernet_Generic Library with Large Buffer
Ethernet_Generic v2.4.0
[ETG] Default SPI pinout:
[ETG] MOSI: 23
[ETG] MISO: 19
[ETG] SCK: 18
[ETG] SS: 5
[ETG] =========================
[ETG] ESP32 setCsPin: 5
[ETG] W5100 init, using SS_PIN_DEFAULT = 22 , new ss_pin = 10 , W5100Class::ss_pin = 5
[ETG] Chip is W5500
[ETG] W5100::init: W5500, SSIZE = 8192
[ETG] Currently Used SPI pinout:
[ETG] MOSI: 23
[ETG] MISO: 19
[ETG] SCK: 18
[ETG] SS: 5
[ETG] =========================
Using mac index = 1
Connected! IP address: 192.168.10.147
Speed: 100 MB, Duplex: FULL DUPLEX, Link status: LINK
LLego a la parte de initwebsocket y task
termino inits
[SIoC] add packet 42["setRele",{"Dato":"hola"}]
[SIoC] add packet 42["getPrueba",{"name":"hola ese","SERVIDOR":"HOLA MUNDO"}]
[SIoC] Disconnected!
[SIoC] add packet 42["setRele",{"Dato":"hola"}]
[SIoC] add packet 42["getPrueba",{"name":"hola ese","SERVIDOR":"HOLA MUNDO"}]
[SIoC] Disconnected!
[SIoC] add packet 42["setRele",{"Dato":"hola"}]
[SIoC] add packet 42["getPrueba",{"name":"hola ese","SERVIDOR":"HOLA MUNDO"}]
[SIoC] Disconnected!
then the loop remains without emitting it just remains as shown above
sketch:
/****************************************************************************************************************************
WebServer.ino
Ethernet_Generic is a library for the W5x00 Ethernet shields trying to merge the good features of
previous Ethernet libraries
Built by Khoi Hoang https://github.com/khoih-prog/Ethernet_Generic
*****************************************************************************************************************************/
/*
The Arduino board communicates with the shield using the SPI bus. This is on digital pins 11, 12, and 13 on the Uno
and pins 50, 51, and 52 on the Mega. On both boards, pin 10 is used as SS. On the Mega, the hardware SS pin, 53,
is not used to select the Ethernet controller chip, but it must be kept as an output or the SPI interface won't work.
*/
#include "defines.h"
#include <SocketIoClient.h>
#include <Arduino_JSON.h>
#include <tcpip_adapter.h>
//TaskHandle_t Task1;
SocketIoClient socketIO;
//void Task1code( void * parameter ){
// Serial.print("Task1 is running on core ");
// Serial.println(xPortGetCoreID());
// while(1){
// socketIO.loop();
// delay(100);
// }
//}
//
//
void initWebSocket()
{
// server address, port and URL
socketIO.begin("192.168.10.59",8000);
// event handler for the event message
socketIO.on("asignacion",getresponse);
//socketIO.on("getPrueba",getresponse);
socketIO.loop();
delay(5000);
}
void getresponse(const char *payload, size_t length){
Serial.printf("response: ",payload);
String data = String(payload);
data.replace("\\","");
JSONVar dato = JSON.parse(data);
Serial.println(dato["litros"]);
}
void setup()
{
Serial.begin(115200);
while (!Serial && millis() < 5000);
Serial.print("\nStarting WebServer on "); Serial.print(BOARD_NAME);
Serial.print(F(" with ")); Serial.println(SHIELD_TYPE);
Serial.println(ETHERNET_GENERIC_VERSION);
#if (USING_SPI2)
#if defined(CUR_PIN_MISO)
ETG_LOGWARN(F("Default SPI pinout:"));
ETG_LOGWARN1(F("MOSI:"), CUR_PIN_MOSI);
ETG_LOGWARN1(F("MISO:"), CUR_PIN_MISO);
ETG_LOGWARN1(F("SCK:"), CUR_PIN_SCK);
ETG_LOGWARN1(F("SS:"), CUR_PIN_SS);
ETG_LOGWARN(F("========================="));
#endif
#else
ETG_LOGWARN(F("Default SPI pinout:"));
ETG_LOGWARN1(F("MOSI:"), MOSI);
ETG_LOGWARN1(F("MISO:"), MISO);
ETG_LOGWARN1(F("SCK:"), SCK);
ETG_LOGWARN1(F("SS:"), SS);
ETG_LOGWARN(F("========================="));
#endif
#if defined(ESP32)
// You can use Ethernet.init(pin) to configure the CS pin
//Ethernet.init(10); // Most Arduino shields
//Ethernet.init(5); // MKR ETH shield
//Ethernet.init(0); // Teensy 2.0
//Ethernet.init(20); // Teensy++ 2.0
//Ethernet.init(15); // ESP8266 with Adafruit Featherwing Ethernet
//Ethernet.init(33); // ESP32 with Adafruit Featherwing Ethernet
#endif
#ifndef USE_THIS_SS_PIN
#define USE_THIS_SS_PIN 5 //22 // For ESP32
#endif
ETG_LOGWARN1(F("ESP32 setCsPin:"), USE_THIS_SS_PIN);
// Must use library patch for Ethernet, EthernetLarge libraries
// ESP32 => GPIO2,4,5,13,15,21,22 OK with Ethernet, Ethernet2, EthernetLarge
// ESP32 => GPIO2,4,5,15,21,22 OK with Ethernet3
//Ethernet.setCsPin (USE_THIS_SS_PIN);
Ethernet.init (USE_THIS_SS_PIN);
// start the ethernet connection and the server:
// Use DHCP dynamic IP and random mac
uint16_t index = millis() % NUMBER_OF_MAC;
// Use Static IP
//Ethernet.begin(mac[index], ip);
Ethernet.begin(mac[index]);
//SPIClass SPI2(HSPI);
//Ethernet.begin(mac[index], &SPI2);
// Just info to know how to connect correctly
// To change for other SPI
#if defined(CUR_PIN_MISO)
ETG_LOGWARN(F("Currently Used SPI pinout:"));
ETG_LOGWARN1(F("MOSI:"), CUR_PIN_MOSI);
ETG_LOGWARN1(F("MISO:"), CUR_PIN_MISO);
ETG_LOGWARN1(F("SCK:"), CUR_PIN_SCK);
ETG_LOGWARN1(F("SS:"), CUR_PIN_SS);
ETG_LOGWARN(F("========================="));
#else
ETG_LOGWARN(F("Currently Used SPI pinout:"));
ETG_LOGWARN1(F("MOSI:"), MOSI);
ETG_LOGWARN1(F("MISO:"), MISO);
ETG_LOGWARN1(F("SCK:"), SCK);
ETG_LOGWARN1(F("SS:"), SS);
ETG_LOGWARN(F("========================="));
#endif
Serial.print(F("Using mac index = "));
Serial.println(index);
Serial.print(F("Connected! IP address: "));
Serial.println(Ethernet.localIP());
if ( (Ethernet.getChip() == w5500) || (Ethernet.getAltChip() == w5100s) )
{
Serial.print(F("Speed: ")); Serial.print(Ethernet.speedReport());
Serial.print(F(", Duplex: ")); Serial.print(Ethernet.duplexReport());
Serial.print(F(", Link status: ")); Serial.println(Ethernet.linkReport());
}
Serial.println("LLego a la parte de initwebsocket y task");
Serial.println("termino inits");
// tcpip_adapter_init();
// for (int i = TCPIP_ADAPTER_IF_STA; i < TCPIP_ADAPTER_IF_MAX; i++) {
// if (tcpip_adapter_is_netif_up((tcpip_adapter_if_t)i))
// ESP_LOGI(TAG, "interface %i up ", i);
// else
// ESP_LOGI(TAG, "interface %i down ", i);
// }
esp_netif_init();//ojo con esta funcion https://gitter.im/espressif/arduino-esp32?at=607b291f06e2e024e85cdf50
initWebSocket();
// xTaskCreatePinnedToCore(Task1code,"Task1",10000,NULL,1,&Task1,0);
}
void loop()
{
//socketio.loop();
//socketIO.emit("getPrueba","{\"hello world\"}");
//socketIO.emit("plainString", "\"this is a plain string\"");
socketIO.emit("setRele","{\"Dato\":\"hola\"}");
delay(500);
//socketIO.emit("app","{\"name\":\"hola ese\",\"chava\":\"hola chava\"}");//esta libreria solo maneja archivos json
socketIO.emit("getPrueba","{\"name\":\"hola ese\",\"SERVIDOR\":\"HOLA MUNDO\"}");
//socketIO.emit("setData","{\"Dato\":\"hola\",\"Dato2\":\"Andre\"}");
//socketIO.on("get",getresponse);
delay(500);
socketIO.loop();
}
i only use two events to emit to the server they are setRele and getprueba as shown in the loop
server java script:
var app = require('express')();
var http = require('http').Server(app);
var io = require('socket.io')(http,{allowEIO3: true ,cors: {origins: ['http://localhost:4200', 'http://localhost']}});
var port = process.env.PORT || 8080;
app.get('/', (req, res) => {
console.log("app works");
});
io.on('connection', (socket) => {
console.log(socket.id);
/**Catalogos */
// socket.emit("GetConfiguracion","{\"code\":\"ECOA-0179\",\"cambio\":\"0\",\"idRespuesta\":\"1\",\"Pines\":[{},{}]}");
// socket.emit("Reiniciar","{\"CodigoMDC\":\"ECOA-0179\"}");
// socket.emit("SetRelee","{\"code\":\"ECOA-0179\",\"f\":\"2022/04/26 03:51:33\",\"p\":\"26\",\"v\":\"1.00\"}");
socket.on("stateChanged", (params) => {
console.log(params); // x8WIv7-mJelg7on_ALbx
});
socket.on("getPrueba", (params) => {
console.log(params); // x8WIv7-mJelg7on_ALbx
});
socket.on("setRele", (params) => {
console.log(params); // x8WIv7-mJelg7on_ALbx
//socket.emit("SetRelee","{\"code\":\"ECOA-0179\",\"f\":\"2022/04/26 03:51:33\",\"p\":\"26\",\"v\":\"1.00\"}");
});
socket.on("ConfiguracionAplicada", (params) => {
console.log(params); // x8WIv7-mJelg7on_ALbx
});
socket.on('disconnect', () =>
{
console.log("Desconectado id: ",socket.id);
});
});
http.listen(port, () => {
console.log('listening on :' + port);
});
If someone could help me, it would be very helpful. Thank you. I'm new to ethernet connectivity. I hope you understand.
