Is it possible to access a device (e.g. a Sonos box) from an emulated android phone via network bridge?
added tap0 and br0 to my Network configuration from here:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever
2: enp2s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq master br0 state UP group default qlen 1000 link/ether dc:0e:a1:29:5a:04 brd ff:ff:ff:ff:ff:ff inet6 fe80::de0e:a1ff:fe29:5a04/64 scope link valid_lft forever preferred_lft forever
3: tap0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast master br0 state DOWN group default qlen 1000 link/ether 92:24:b9:90:cc:52 brd ff:ff:ff:ff:ff:ff
4: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000 link/ether 0a:f8:c3:53:5b:d2 brd ff:ff:ff:ff:ff:ff inet 192.168.100.14/24 brd 192.168.100.255 scope global dynamic br0 valid_lft 7183sec preferred_lft 7183sec inet6 fe80::8f8:c3ff:fe53:5bd2/64 scope link valid_lft forever preferred_lft forever
started avd with:
./emulator
-avd Nexus_5_API_26
-verbose
-qemu
-device virtio-net-pci,netdev=hn0,mac=52:55:00:d1:55:51
-netdev tap,id=hn0,ifname=tap0,script=no,downscript=no
Network configuration from emulated Device :
$ ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 52:55:00:d1:55:51 brd ff:ff:ff:ff:ff:ff
4: wlan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 02:00:00:44:55:66 brd ff:ff:ff:ff:ff:ff
6: hwsim0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default link/ieee802.11/radiotap 12:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff
7: sit0@NONE: mtu 1480 qdisc noop state DOWN group default link/sit 0.0.0.0 brd 0.0.0.0
9: radio0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 0e:86:a3:d8:13:47 brd ff:ff:ff:ff:ff:ff inet 192.168.200.2/24 brd 192.168.200.255 scope global radio0 valid_lft forever preferred_lft forever inet6 fec0::6d8a:a6a1:3127:532c/64 scope site temporary dynamic valid_lft 86213sec preferred_lft 14213sec inet6 fec0::c86:a3ff:fed8:1347/64 scope site mngtmpaddr dynamic valid_lft 86213sec preferred_lft 14213sec inet6 fe80::c86:a3ff:fed8:1347/64 scope link valid_lft forever preferred_lft forever
Device shows IP Address from radio0: 192.168.200.2
eth1 shows the MAC Address (52:55:00:d1:55:51) i gave with the arguments
Is there a change to change the IP-range to 192.168.100.x?
