Hello, I am looking for a visa sponsorship for relocation.

I am an electronics and FPGA engineer, a microcontroller and PC programmer. My main experience is in programming Altera FPGA chips (now IntelFPGA).

You can see my portfolio on the Opencores website (link above).

I'm using Verilog/SystemVerilog hardware description language (HDL) and Quartus IDE for FPGA, and C programming language for microcontrollers. I have experience with NIOS, STM32, XMOS, NXP, AVR8 microcontrollers. I can write programs with a graphic user interface (GUI) for Windows in C# and for Linux Ubuntu or Raspberry PI in Qt/C++.

I have experience with Ethernet (UDP/IP, ARP, GOOSE) protocols, USB 3.0/2.0 controllers (Cypress FX3/FX2, FTDI), DSP (FIR, CIC, FFT, correlation processing, PSK modulation), CAN and CANopen protocols, PCI, MIL-STD-1553B, ARINC 429, UART, ModBus, I2C, SPI, SerDes LVDS, NOR flash, SDRAM controllers, radar systems, asynchronous, stepper and servo motors, ultrasonic phased array testing systems, wire-cut EDM CNC machines.

I can create, route and solder electronic circuits. I am familiar with P-CAD and Altium Designer programs.

I'm always interested in learning new technologies, new programs and new fields of knowledge independently that are needed for work.

Recently I have been working on my projects alone, but I also enjoy working in a team.

My main achievements are:

• a prototype of a mechanical radar system. I created programs for FPGA, microcontrollers and computer, and some electronic circuits. I emitted and received a phase manipulated signal. I implemented vector control for asynchronous motors using a Sin-Cos encoder and PWM, and I depicted a radiolocation image in MatLab;
• a prototype of an ultrasonic phased array system. I have developed FPGA design, a microcontroller program and a debug program for PC. I formed an ultrasonic beam and calculated a synthetic aperture, but it was only a 32-element linear array of transducers;
• an experience with XMOS multicore processor that has a specific architecture that can replace the FPGA in some tasks;
• a spark cutting 4-axis multipass CNC machine. I developed a circuit design, FPGA and microcontroller programs, and an user interface for Linux that is compatible with Raspberry PI and x86.

I am able to pass an English exam for a work visa, but not for an immigration program. I will improve my English in a language environment.