The biochemical systems equation is a compact equation of nonlinear differential equations for describing a kinetic model for any network of coupled biochemical reactions and transport processes.[1][2]

The equation is expressed in the following form:

The notation for the dependent variable x varies among authors. For example, some authors use s, indicating species.[2] x is used here to match the state space notation used in control theory but either notation is acceptable.

is the stoichiometry matrix which is an by matrix of stoichiometry coefficient. is the number of species and the number of biochemical reactions. The notation for is also variable. In constraint-based modeling the symbol tends to be used to indicate 'stoichiometry'. However in biochemical dynamic modeling[3] and sensitivity analysis, tends to be in more common use to indicate 'number'. In the chemistry domain, the symbol used for the stoichiometry matrix is highly variable though the symbols S and N have been used in the past.[4][5]

is an n-dimensional column vector of reaction rates, and is a p-dimensional column vector of parameters.

Example

Given the biochemical network:

where and are fixed species to ensure the system is open. The system equation can be written as:[1][6]

So that:

The elements of the rate vector will be rate equations that are functions of one or more species and parameters, p. In the example, these might be simple mass-action rate laws such as where is the rate constant parameter. The particular laws chosen will depend on the specific system under study. Assuming mass-action kinetics, the above equation can be written in complete form as:

Analysis

The system equation can be analyzed by looking at the linear response of the equation around the steady-state with respect to the parameter .[7] At steady-state, the system equation is set to zero and given by:

Differentiating the equation with respect to and rearranging gives:

This derivation assumes that the stoichiometry matrix has full rank. If this is not the case, then the inverse won't exist.

Example

For example, consider the same problem from the previous section of a linear chain. The matrix is the unscaled elasticity matrix:

In this specific problem there are 3 species () and 4 reaction steps (), the elasticity matrix is therefore a matrix. However, a number of entries in the matrix will be zero. For example will be zero since has no effect on . The matrix, therefore, will contain the following entries:

The parameter matrix depends on which parameters are considered. In Metabolic control analysis, a common set of parameters are the enzyme activities. For the sake of argument, we can equate the rate constants with the enzyme activity parameters. We also assume that each enzyme, , only can affect its own step and no other. The matrix is the unscaled elasticity matrix with respect to the parameters. Since there are 4 reaction steps and 4 corresponding parameters, the matrix will be a 4 by 4 matrix. Since each parameter only affects one reaction, the matrix will be a diagonal matrix:

Since there are 3 species and 4 reactions, the resulting matrix will be a 3 by 4 matrix

Each expression in the matrix describes how a given parameter influences the steady-state concentration of a given species. Note that this is the unscaled derivative. It is often the case that the derivative is scaled by the parameter and concentration to eliminate units as well as turn the measure into a relative change.

Assumptions

The biochemical systems equation makes two key assumptions:

  1. Species exist in a well-stirred reactor, so there are no spatial gradients.[8][9][10]
  2. Species concentrations are high enough so that stochastic effects are negligible[11][12][13]

See also

References

  1. 1 2 Reder, Christine (November 1988). "Metabolic control theory: A structural approach". Journal of Theoretical Biology. 135 (2): 175–201. Bibcode:1988JThBi.135..175R. doi:10.1016/S0022-5193(88)80073-0. PMID 3267767.
  2. 1 2 Hofmeyr, Jan-hendrik S. (2001). "Metabolic control analysis, in a nutshell". In Proceedings of the 2 Nd International Conference on Systems Biology: 291–300. CiteSeerX 10.1.1.324.922.
  3. Stucki, Jörg W. (1979). "Stability analysis of biochemical systems— A practical guide". Progress in Biophysics and Molecular Biology. 33 (2): 99–187. doi:10.1016/0079-6107(79)90027-0. PMID 674688.
  4. Fjeld, M.; Asbjørnsen, O.A.; Åström, K.J. (September 1974). "Reaction invariants and their importance in the analysis of eigenvectors, state observability and controllability of the continuous stirred tank reactor". Chemical Engineering Science. 29 (9): 1917–1926. Bibcode:1974ChEnS..29.1917F. doi:10.1016/0009-2509(74)85009-8.
  5. Park, David J. M. (1 September 1975). "SMISS, stoichiometric matrix inversion for steady state metabolic networks". Computer Programs in Biomedicine. 5 (1): 46–60. doi:10.1016/0010-468X(75)90026-4. PMID 1164840.
  6. Cornish-Bowden, Athel; Hofmeyr, Jan-Hendrik S. (May 2002). "The Role of Stoichiometric Analysis in Studies of Metabolism: An Example". Journal of Theoretical Biology. 216 (2): 179–191. Bibcode:2002JThBi.216..179C. doi:10.1006/jtbi.2002.2547. PMID 12079370.
  7. Heinrich, Reinhart; Schuster, Stefan (1996). The Regulation of Cellular Systems. New York, NY: Springer. ISBN 0412032619.
  8. Cowan, Ann E.; Moraru, Ion I.; Schaff, James C.; Slepchenko, Boris M.; Loew, Leslie M. (2012). "Spatial Modeling of Cell Signaling Networks". Computational Methods in Cell Biology. Vol. 110. pp. 195–221. doi:10.1016/B978-0-12-388403-9.00008-4. ISBN 9780123884039. PMC 3519356. PMID 22482950.
  9. Fell, David A. (May 1980). "Theoretical analyses of the functioning of the high- and low-Km cyclic nucleotide phosphodiesterases in the regulation of the concentration of adenosine 3′,5′-cyclic monophosphate in animal cells". Journal of Theoretical Biology. 84 (2): 361–385. Bibcode:1980JThBi..84..361F. doi:10.1016/S0022-5193(80)80011-7. PMID 6251314.
  10. Kholodenko, Boris N. (March 2006). "Cell-signalling dynamics in time and space". Nature Reviews Molecular Cell Biology. 7 (3): 165–176. doi:10.1038/nrm1838. PMC 1679905. PMID 16482094.
  11. Gillespie, Daniel T. (December 1977). "Exact stochastic simulation of coupled chemical reactions". The Journal of Physical Chemistry. 81 (25): 2340–2361. doi:10.1021/j100540a008. S2CID 2606191.
  12. Gillespie, Daniel T. (1 May 2007). "Stochastic Simulation of Chemical Kinetics". Annual Review of Physical Chemistry. 58 (1): 35–55. Bibcode:2007ARPC...58...35G. doi:10.1146/annurev.physchem.58.032806.104637. PMID 17037977.
  13. Andrews, Steven S; Bray, Dennis (September 2004). "Stochastic simulation of chemical reactions with spatial resolution and single molecule detail". Physical Biology. 1 (3): 137–151. Bibcode:2004PhBio...1..137A. doi:10.1088/1478-3967/1/3/001. PMID 16204833. S2CID 16394428.
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.