CII Iris 80
Iris 80 at Institut universitaire de calcul automatique de Lorraine(IUCAL) in Nancy, 1977
ManufacturerCII
TypeMainframe computer
Release date1971 (announced in 1969)
Discontinued1976
Units soldAbout a hundred
Operating systemSiris 8
CPUIntegrated (3rd generation), 32 bits, available in single and multiple configurations @ 650ns cycle (~1.5 MHz)
Memory4 MB
StorageHard drives (25 to 200 MB)
PredecessorCII Iris 50
SuccessorCII-HB DPS-7

The CII Iris 80 computer is the most powerful computer made by the French company CII as part of Plan Calcul. It was released in 1970 and had roughly the same capabilities and performance than its main rivals in Europe: the IBM 360/75 and 360/85.[1]

The Iris 80 is the backward-compatible successor to the CII 10070, a licensed SDS Sigma-7, and to the Iris 50, an in-house development from the Sigma-9 architecture. It essentially upgraded the Iris 50 with modern integrated circuits, as well as multiprocessor capabilities.[1] Its operating system, Siris 8, was also upgraded from Siris 7 to leverage the new capabilities of the Iris 80.

Because of a policy of national preference that the Plan Calcul imposed on the public sector, this computer was installed at four of the approximately twenty French university computing centers in the mid-1970s, as well as INRIA and other research organizations.

About a hundred Iris 80s were delivered, including 27 dual processors.

The CS 40, used for telephone switching, was derived from it.

The original successors to the Iris 80 was supposed to be the CII / Unidata X4 and X5 set to be released in 1976.[1] However, after the eventual merger of CII with Honeywell-Bull, the Iris 80 was instead succeeded by the DPS-7, which included an Iris 80 and Siris 8 emulation mode to ensure compatibility.[2]

Hardware

CPU

The CPU is a modification of the CII 10070 (32-bit words, largely identical instruction set), with addressing revised for multi-processor operation. Paging uses associative memory. Main memory can be expanded to 4 megabytes. Calculation precision is 64 bits, ensuring the convergence of calculations that may diverge on other machines.

Peripherals

Magnetic disk capacity increased from the MD 25 (25 megabytes) to MD 200 (200 megabytes) by 1974. Mitra 15 minicomputers are used as controllers.

Software

Operating systems

The Iris 80's operating system is a multitasking operating system known as Siris 8, a rewrite of Siris 7, intended to take advantage of new addressing modes. This rewrite was carried out by Jean Ichbiah,[3] and notably made it possible to operate an Iris 80 triple-processor system in Évry.

Siris 8 handles a varied workload, including batch processing (local and remote processing) and time sharing. It was the first system to include routing software for the transport of data to other computers, Transiris, and a networking and data sharing system, adapted to the customers at universities, research centers, and administrations of Iris 80. The CYCLADES network was notably demonstrated at SICOB 1975 with applications simultaneously running at the INRIA headquarters at Rocquencourt and various regional sites.

Languages

Software packages

References

  1. 1 2 3 "Fédération des Equipes Bull - CII Iris 80". www.feb-patrimoine.com. Retrieved 2023-08-02.
  2. "CII-Honeywell-Bull - GCOS7: Emulators". www.feb-patrimoine.com. Retrieved 2023-08-16.
  3. "Jean Ichbiah est ensuite passé au projet LIS, Langage d'Implémentation de Systèmes, destiné à rendre portables les systèmes d'exploitation par la simple réécriture des modules de bas niveau, puis à la définition du langage de programmation Ada (langage)|Ada."
This article is issued from Wikipedia. The text is licensed under Creative Commons - Attribution - Sharealike. Additional terms may apply for the media files.