How do I get PHP errors to display?

Question

I have checked my PHP ini file (php.ini) and display_errors is set and also error reporting is E_ALL. I have restarted my Apache webserver.

I have even put these lines at the top of my script, and it doesn't even catch simple parse errors. For example, I declare variables with a "$" and I don't close statements";". But all my scripts show a blank page on these errors, but I want to actually see the errors in my browser output.

error_reporting(E_ALL);
ini_set('display_errors', 1);

What is left to do?

Answer 1

DEV environment

This always works for me:

ini_set('display_errors', '1');
ini_set('display_startup_errors', '1');
error_reporting(E_ALL);

However, this doesn't make PHP to show parse errors occurred in the same file - the only way to show those errors is to modify your php.ini with this line:

display_errors = on

(if you don't have access to php.ini, then putting this line in .htaccess might work too):

php_flag display_errors 1

PROD environment

Note that above recommentdtion is only suitable for the dev environment. On a live site it must be

display_errors = off
log_errors = on

And then you'll be able to see all errors in the error log. See Where to find PHP error log

AJAX calls

In case of AJAX call, on a dev server open DevTools (F12), then Network tab. Then initiate the request which result you want to see, and it will appear in the Network tab. Click on it and then the Response tab. There you will see the exact output.
While on a live server just check the error log all the same.

Answer 2

You can't catch parse errors in the same file where error output is enabled at runtime, because it parses the file before actually executing anything (and since it encounters an error during this, it won't execute anything). You'll need to change the actual server configuration so that display_errors is on and the approriate error_reporting level is used. If you don't have access to php.ini, you may be able to use .htaccess or similar, depending on the server.

This question may provide additional info.

Answer 3

Inside your php.ini:

display_errors = on

Then restart your web server.

Answer 4

To display all errors you need to:

1. Have these lines in the PHP script you're calling from the browser (typically index.php):

error_reporting(E_ALL);
ini_set('display_errors', '1');

2.(a) Make sure that this script has no syntax errors

—or—

2.(b) Set display_errors = On in your php.ini

Otherwise, it can't even run those 2 lines!

You can check for syntax errors in your script by running (at the command line):

php -l index.php

If you include the script from another PHP script then it will display syntax errors in the included script. For example:

index.php

error_reporting(E_ALL);
ini_set('display_errors', '1');

// Any syntax errors here will result in a blank screen in the browser

include 'my_script.php';

my_script.php

adjfkj // This syntax error will be displayed in the browser

Answer 5

Some web hosting providers allow you to change PHP parameters in the .htaccess file.

You can add the following line:

php_value display_errors 1

I had the same issue as yours and this solution fixed it.

Answer 6

Warning: the below answer is factually incorrect. Nothing has been changed in error handling, uncaught exceptions are displayed just like other errors. Suggested approach must be used with caution, because it outputs errors unconditionally, despite the display_error setting and may pose a threat by revealing the sensitive information to an outsider on a live site.

You might find all of the settings for "error reporting" or "display errors" do not appear to work in PHP 7. That is because error handling has changed. Try this instead:

try{
     // Your code
} 
catch(Error $e) {
    $trace = $e->getTrace();
    echo $e->getMessage().' in '.$e->getFile().' on line '.$e->getLine().' called from '.$trace[0]['file'].' on line '.$trace[0]['line'];
}

Or, to catch exceptions and errors in one go (this is not backward compatible with PHP 5):

try{
     // Your code
} 
catch(Throwable $e) {
    $trace = $e->getTrace();
    echo $e->getMessage().' in '.$e->getFile().' on line '.$e->getLine().' called from '.$trace[0]['file'].' on line '.$trace[0]['line'];
}

Answer 7

This will work:

<?php
     error_reporting(E_ALL);
     ini_set('display_errors', 1);    
?>

Answer 8

Use:

ini_set('display_errors', 1);
ini_set('display_startup_errors', 1);
error_reporting(E_ALL);

This is the best way to write it, but a syntax error gives blank output, so use the console to check for syntax errors. The best way to debug PHP code is to use the console; run the following:

php -l phpfilename.php

Answer 9

Set this in your index.php file:

ini_set('display_errors', 1);
ini_set('display_startup_errors', 1);
error_reporting(E_ALL);

Answer 10

Create a file called php.ini in the folder where your PHP file resides.

Inside php.ini add the following code (I am giving an simple error showing code):

display_errors = on

display_startup_errors = on

Answer 11

In order to display a parse error, instead of setting display_errors in php.ini you can use a trick: use include.

Here are three pieces of code:

File: tst1.php

<?php
error_reporting(E_ALL);
ini_set('display_errors', 'On');
// Missing " and ;
echo "Testing

When running this file directly, it will show nothing, given display_errors is set to 0 in php.ini.

Now, try this:

File: tst2.php

<?php
error_reporting(E_ALL);
ini_set('display_errors', 'On');
include ("tst3.php");

File: tst3.php

<?php
// Missing " and ;
echo "Testing

Now run tst2.php which sets the error reporting, and then include tst3. You will see:

Parse error: syntax error, unexpected end of file, expecting variable (T_VARIABLE) or ${ (T_DOLLAR_OPEN_CURLY_BRACES) or {$ (T_CURLY_OPEN) in tst3.php on line 4

Answer 12

If, despite following all of the above answers (or you can't edit your php.ini file), you still can't get an error message, try making a new PHP file that enables error reporting and then include the problem file. eg:

error_reporting(E_ALL);
ini_set('display_errors', 1);
require_once('problem_file.php');

Despite having everything set properly in my php.ini file, this was the only way I could catch a namespace error. My exact scenario was:

//file1.php
namespace a\b;
class x {
    ...
}

//file2.php
namespace c\d;
use c\d\x; //Dies because it's not sure which 'x' class to use
class x {
    ...
}

Answer 13

I would usually go with the following code in my plain PHP projects.

if(!defined('ENVIRONMENT')){
    define('ENVIRONMENT', 'DEVELOPMENT');
}

$base_url = null;

if (defined('ENVIRONMENT'))
{
    switch (ENVIRONMENT)
    {
        case 'DEVELOPMENT':
            $base_url = 'http://localhost/product/';
            ini_set('display_errors', 1);
            ini_set('display_startup_errors', 1);
            error_reporting(E_ALL);
            break;

        case 'PRODUCTION':
            $base_url = 'Production URL'; /* https://google.com */
            error_reporting(E_ALL);
            ini_set('display_errors', 0);
            ini_set('display_startup_errors', 0);
            ini_set('log_errors', 1); // Mechanism to log errors
            break;

        default:
            exit('The application environment is not set correctly.');
    }
}

Answer 14

If you somehow find yourself in a situation where you can't modifiy the setting via php.ini or .htaccess you're out of luck for displaying errors when your PHP scripts contain parse errors. You'd then have to resolve to linting the files on the command line like this:

find . -name '*.php' -type f -print0 | xargs -0 -n1 -P8 php -l | grep -v "No syntax errors"

If your host is so locked down that it does not allow changing the value via php.ini or .htaccess, it may also disallow changing the value via ini_set. You can check that with the following PHP script:

<?php
if( !ini_set( 'display_errors', 1 ) ) {
  echo "display_errors cannot be set.";
} else {
  echo "changing display_errors via script is possible.";
}

Answer 15

You can do something like below:

Set the below parameters in your main index file:

    ini_set('display_errors', 1);
    ini_set('display_startup_errors', 1);

Then based on your requirement you can choose which you want to show:

For all errors, warnings and notices:

    error_reporting(E_ALL); OR error_reporting(-1);

For all errors:

    error_reporting(E_ERROR);

For all warnings:

    error_reporting(E_WARNING);

For all notices:

    error_reporting(E_NOTICE);

For more information, check here.

Answer 16

You can add your own custom error handler, which can provide extra debug information. Furthermore, you can set it up to send you the information via email.

function ERR_HANDLER($errno, $errstr, $errfile, $errline){
    $msg = "<b>Something bad happened.</b> [$errno] $errstr <br><br>
    <b>File:</b> $errfile <br>
    <b>Line:</b> $errline <br>
    <pre>".json_encode(debug_backtrace(), JSON_PRETTY_PRINT)."</pre> <br>";

    echo $msg;

    return false;
}

function EXC_HANDLER($exception){
    ERR_HANDLER(0, $exception->getMessage(), $exception->getFile(), $exception->getLine());
}

function shutDownFunction() {
    $error = error_get_last();
    if ($error["type"] == 1) {
        ERR_HANDLER($error["type"], $error["message"], $error["file"], $error["line"]);
    }
}

set_error_handler ("ERR_HANDLER", E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED);
register_shutdown_function("shutdownFunction");
set_exception_handler("EXC_HANDLER");

Answer 17

Accepted asnwer including extra options. In PHP files for in my DEVELOPMENT apache vhost (.htaccess if you can ensure it doesn't get into production):

ini_set('display_errors', '1');
ini_set('display_startup_errors', '1');
error_reporting(E_ALL);

However, this doesn't make PHP to show parse errors - the only way to show those errors is to modify your php.ini with this line:

display_errors = on

(if you don't have access to php.ini, then putting this line in .htaccess might work too):

// I've added some extra options that set E_ALL as per https://www.php.net/manual/en/errorfunc.configuration.php.
php_flag log_errors on
php_flag display_errors on
php_flag display_startup_errors on
php_value error_reporting 2147483647
php_value error_log /var/www/mywebsite.ext/logs/php.error.log

Answer 18

This code on top should work:

error_reporting(E_ALL);

However, try to edit the code on the phone in the file:

error_reporting =on

Answer 19

The best/easy/fast solution that you can use if it's a quick debugging, is to surround your code with catching exceptions. That's what I'm doing when I want to check something fast in production.

try {
    // Page code
}
catch (Exception $e) {
    echo 'Caught exception: ',  $e->getMessage(), "\n";
}

Answer 20

    <?php
    // Turn off error reporting
    error_reporting(0);

    // Report runtime errors
    error_reporting(E_ERROR | E_WARNING | E_PARSE);

    // Report all errors
    error_reporting(E_ALL);

    // Same as error_reporting(E_ALL);
    ini_set("error_reporting", E_ALL);

    // Report all errors except E_NOTICE
    error_reporting(E_ALL & ~E_NOTICE);
    ?>

While your site is live, the php.ini file should have display_errors disabled for security reasons. However, for the development environment, display_errors can be enabled for troubleshooting.

Answer 21

Just write:

error_reporting(-1);

Answer 22

If you have Xdebug installed you can override every setting by setting:

xdebug.force_display_errors = 1;
xdebug.force_error_reporting = -1;

force_display_errors

Type: int, Default value: 0, Introduced in Xdebug >= 2.3 If this setting is set to 1 then errors will always be displayed, no matter what the setting of PHP's display_errors is.

force_error_reporting

Type: int, Default value: 0, Introduced in Xdebug >= 2.3 This setting is a bitmask, like error_reporting. This bitmask will be logically ORed with the bitmask represented by error_reporting to dermine which errors should be displayed. This setting can only be made in php.ini and allows you to force certain errors from being shown no matter what an application does with ini_set().

Answer 23

If it is on the command line, you can run php with -ddisplay_errors=1 to override the setting in php.ini:

php -ddisplay_errors=1 script.php

Answer 24

In Unix CLI, it's very practical to redirect only errors to a file:

./script 2> errors.log

From your script, either use var_dump() or equivalent as usual (both STDOUT and STDERR will receive the output), but to write only in the log file:

fwrite(STDERR, "Debug infos\n"); // Write in errors.log^

---

Then from another shell, for live changes:

tail -f errors.log

or simply

watch cat errors.log

Answer 25

Report all errors except E_NOTICE

error_reporting(E_ALL & ~E_NOTICE);

Display all PHP errors

error_reporting(E_ALL);  or ini_set('error_reporting', E_ALL);

Turn off all error reporting

error_reporting(0);

Answer 26

If you are on a SharedHosting plan (like on hostgator)... simply adding

php_flag display_errors 1

into a .htaccess file and uploading it to the remote folder may not yield the actual warnings/errors that were generated on the server.

What you will also need to do is edit the php.ini

This is how you do it via cPanel (tested on hostgator shared hosting plan)

After logging into your cPanel, search for MultiPHP INI Editor. It is usually found under the SOFTWARE section in your cPanel list of items.

On the MultiPHP INI Editor page ...you can stay on the basic mode tab and just check the button on the line that says display_errors. Then click the Apply button to save.

IMPORTANT: Just remember to turn it back off when you are done debugging; because this is not recommended for public servers.

Answer 27

As it is not clear what OS you are on these are my 2 Windows cents. If you are using XAMPP you need to manually create the logs folder under C:\xampp\php. Not your fault, ApacheFriends ommitted this.

To read and follow this file do.

Get-Content c:\xampp\php\logs\php_error_log -Wait

To do this in VSCode create a task in .vscode\tasks.json

{ 
  // See https://go.microsoft.com/fwlink/?LinkId=733558 
  // for the documentation about the tasks.json format 
  "version": "2.0.0", 
  "tasks": [ 
    { 
      "label": "Monitor php errors", 
      "type": "shell", 
      "command": "Get-Content -Wait c:\\xampp\\php\\logs\\php_error_log", 
      "runOptions": { 
        "runOn": "folderOpen" 
      } 
    } 
  ] 

and have it run on folder load.